Clutch won't release
-
PeterDas
- Posts: 7
- Joined: Mon Jan 06, 2014 9:34 am
- Location: Corpus Christi, Texas
- Motorcycle: 1993 GL1500SE
Clutch won't release
I have a 99 gl1500 trike. I replaced clutch a year ago. My slave was leaking and clutch was growling recently. I pulled the cover and changed pilot bearing. It opened up slave and main seal was backwards so I put new seals in correctly. Now I have bled clutch, and the lever stops about mid point in and won't release clutch. I am asking if there is something I did wrong to cause this condition? I am thinking it is in the slave might be the issue, but thought I would ask to see if I'm overlooking something obvious.
-
PeterDas
- Posts: 7
- Joined: Mon Jan 06, 2014 9:34 am
- Location: Corpus Christi, Texas
- Motorcycle: 1993 GL1500SE
Re: Clutch won't release
Alright, so if you put the clutch lifter plate in backwards, the clutch won't work.... Lesson learned, slow down and pay attention Pete...