
Fairing Pockets
Fairing Pockets
How do you remove the pockets from the fairing on a 2004 Gl1800 with snaps and not screws ?


- Viking
- Posts: 3760
- Joined: Wed Sep 29, 2010 6:59 pm
- Location: North Bay, Ontario, Canada
- Motorcycle: 2009 GL1800 AD
1987 Harley Softail Custom
1974 Harley FLH (sold)
1965 Harley FLHE (sold)
1957 Harley Chopper (sold)
Re: Fairing Pockets
Push the center of the snaps in and remove each of them, then the pocket will come right out. Alternatively, just push in the centers and remove the pocket, being careful not to lose the buttons. To reinstall, reset the centers flush with the button and after putting the pocket back in, press the buttons into the holes in the corners. A ballpoint pen works well for pushing the centers.
- tfdeputydawg
- Posts: 1151
- Joined: Sun Nov 22, 2009 6:59 am
- Location: Indianapolis, In.
- Motorcycle: 06 Wing III/2010 Hannigan
Re: Fairing Pockets
One "improvement" to the above instructions!
The center pins need to be above the body of the rivet to reinstall! Then pushed until one feels them engage at which point the pins are then flush w/the button top of the body of the rivet.
The center pins need to be above the body of the rivet to reinstall! Then pushed until one feels them engage at which point the pins are then flush w/the button top of the body of the rivet.
- Viking
- Posts: 3760
- Joined: Wed Sep 29, 2010 6:59 pm
- Location: North Bay, Ontario, Canada
- Motorcycle: 2009 GL1800 AD
1987 Harley Softail Custom
1974 Harley FLH (sold)
1965 Harley FLHE (sold)
1957 Harley Chopper (sold)
Re: Fairing Pockets
Yeah - like he said.....tfdeputydawg wrote:One "improvement" to the above instructions!
The center pins need to be above the body of the rivet to reinstall! Then pushed until one feels them engage at which point the pins are then flush w/the button top of the body of the rivet.

Re: Fairing Pockets
thanks ,I was trying to pop them from the side and stopped short of breaking one.