Changing ECT Sensor
-
brewza
- Posts: 8
- Joined: Wed Jan 01, 2014 8:58 pm
- Location: Sydney, New South Wales, Australia
- Motorcycle: 2005 GL1800A
Changing ECT Sensor
Got the FI code 7 , I have bought a new ECT sensor part 37870-MAT-E01, trying to pull the covers off but have caught a snag so far, researching this I may have to take the whole fairing off? Is there a simpler way? How does the nosepiece come off?
-
brewza
- Posts: 8
- Joined: Wed Jan 01, 2014 8:58 pm
- Location: Sydney, New South Wales, Australia
- Motorcycle: 2005 GL1800A
Re: Changing ECT Sensor
Got the garnish off. http://www.goldwingfacts.com/1800garnish.htm
-
brewza
- Posts: 8
- Joined: Wed Jan 01, 2014 8:58 pm
- Location: Sydney, New South Wales, Australia
- Motorcycle: 2005 GL1800A
Re: Changing ECT Sensor
All the bolts are undone, two push pins stopping me, remember to cover guard, a card table to sit loose fairing on over wheel.
- Attachments
-
brewza
- Posts: 8
- Joined: Wed Jan 01, 2014 8:58 pm
- Location: Sydney, New South Wales, Australia
- Motorcycle: 2005 GL1800A
Re: Changing ECT Sensor
Still cant access the ECT, going to take the left radiator off
-
brewza
- Posts: 8
- Joined: Wed Jan 01, 2014 8:58 pm
- Location: Sydney, New South Wales, Australia
- Motorcycle: 2005 GL1800A
Re: Changing ECT Sensor
Broke the old sensor getting it off the wire connector, got a 19mm tube socket to unscrew it and fit the new one.
-
brewza
- Posts: 8
- Joined: Wed Jan 01, 2014 8:58 pm
- Location: Sydney, New South Wales, Australia
- Motorcycle: 2005 GL1800A
Re: Changing ECT Sensor
Bike is back together and running properly, phew!
Tips: take the left side fairing off only, put rags under the side bolt holes of the garnish to stop losing bolts when refitting.
Tips: take the left side fairing off only, put rags under the side bolt holes of the garnish to stop losing bolts when refitting.
-
brewza
- Posts: 8
- Joined: Wed Jan 01, 2014 8:58 pm
- Location: Sydney, New South Wales, Australia
- Motorcycle: 2005 GL1800A
Re: Changing ECT Sensor
ect location
