I have a 2013 F6B and today discovered the dealer who repaired it after my accident did not reconnect the outside temperature sensor wire. It is a two wire plug that plugs in somewhere and I can not figure out where. This sensor is on the right side of the bike kind of above the headlight. The wire from it is about 10" long.
Any idea where it goes?
Thanks, Mark
where does this wire connect???
- CMReynolds1
- Posts: 647
- Joined: Wed Sep 24, 2014 5:56 pm
- Location: Oregon
- Motorcycle: 2013 F6B
Re: where does this wire connect???
I have the same bike and I have the schematic too.
This should help you plug it back in.
This should help you plug it back in.
Ride Safe,
Taz
TF 116, RivRon 512, Can Tho, S. Vietnam, 8/66-/9/68, GM(G)2
Taz
TF 116, RivRon 512, Can Tho, S. Vietnam, 8/66-/9/68, GM(G)2
-
- Posts: 3
- Joined: Sun Jul 20, 2014 9:34 pm
- Location: Rossford, Ohio
- Motorcycle: 2013 F6B Deluxe
Re: where does this wire connect???
Found where it goes. Into the harness.
- CMReynolds1
- Posts: 647
- Joined: Wed Sep 24, 2014 5:56 pm
- Location: Oregon
- Motorcycle: 2013 F6B
Re: where does this wire connect???
If you get an issue in the future drop me a PM and I will look it up. Like I said, I bought the Factory Service Manual as I do a lot of my own work. If I can copy something to help you I will.
Ride safe.
Ride safe.
Ride Safe,
Taz
TF 116, RivRon 512, Can Tho, S. Vietnam, 8/66-/9/68, GM(G)2
Taz
TF 116, RivRon 512, Can Tho, S. Vietnam, 8/66-/9/68, GM(G)2