2001 goldwing 1800
-
morrisra
- Posts: 4
- Joined: Tue Apr 14, 2015 8:24 pm
- Location: rome ga
- Motorcycle: 20010honda goldwing
2001 goldwing 1800
I need to find out how to reset the trip meter on my goldwing and also how do I set the clock?
-
thrasherg
- Posts: 2123
- Joined: Tue Oct 20, 2009 11:21 am
- Location: Plano, TX
- Motorcycle: 2017 Yamaha FZ07, 2015 Yamaha Super Tenere ES, 2005 Honda Shadow 750, CRF450X, CRF230, CRF250X, XR200, CR500, Gas Gas TXT200
Re: 2001 goldwing 1800
I can't remember how you adjust the clock, but for the trip meter it's easy. There is a button on the center console marked trip and if you just push the button, it switches between Trip A and Trip B. If you push the trip button down and hold it down for a few seconds, it resets the trip that is being displayed. I believe the ignition must be turned on..
Gary
Gary
Last edited by thrasherg on Tue Apr 28, 2015 2:33 pm, edited 1 time in total.
-
harvey01
- Posts: 873
- Joined: Thu May 31, 2012 7:14 pm
- Location: Henrico, Virginia
- Motorcycle: 2004 GL1800
Re: 2001 goldwing 1800
To adjust the time:
Turn the ignition switch to ON or ACC.
Push the MODE button two times. ‘‘CLOCK ADJUSTMENT’’ will display and the time on the digital clock will blink.
To set the hour, press and release the TRIP button until the desired hour appears.
To set the minute, press and release the DISP. button until the desired minute appears.
Once the time is selected, push the mode button to enter the time.
Turn the ignition switch to ON or ACC.
Push the MODE button two times. ‘‘CLOCK ADJUSTMENT’’ will display and the time on the digital clock will blink.
To set the hour, press and release the TRIP button until the desired hour appears.
To set the minute, press and release the DISP. button until the desired minute appears.
Once the time is selected, push the mode button to enter the time.
harvey
Ride Safe and Ride Often
Ride Safe and Ride Often
-
WingAdmin
- Site Admin
- Posts: 23313
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer - Contact:
Re: 2001 goldwing 1800
When the display is showing "Trip A" or "Trip B", push and hold the "Trip" button until it resets to zero.morrisra wrote:I need to find out how to reset the trip meter on my goldwing and also how do I set the clock?
To adjust the time:
Turn the ignition switch to ON or ACC.
Push the MODE button two times. "CLOCK ADJUSTMENT" will display and the time on the digital clock will blink.
To set the hour, press and release the TRIP button until the desired hour appears.
To set the minute, press and release the DISP. button until the desired minute appears.
Once the time is selected, push the mode button to enter the time.