2013 navi/comfort goldwing Navi, not talking?

[imagine686868]

This is a strange one! My navigation visual is working great, but after I load a destination, it calculates, and gives me ONLY THE FIRST voice command. ( example: go 300 feet ahead and turn right onto 7th street), THEN from that point on no voice commands, and Its all looking at the dash to see where to go? I know the speakers on the dash are working, and set correctly. I even tried to see if it would give the voice through the head set, and it does, BUT ONLY the first command, just like when playing voice directions through the speakers.

Question: Anyone else had this problem with the navi on the 2013 wing?

1. Gives only the FIRST voice command, after entering destination, then NOTHING for the entire rest of a trip???

2. The part that gets me is that it actually does give the First VOICE direction, then nothing?

[topgun]

searching the nav supplement for ideas on "voice" came up with these.... (I'm not a nav. bike owner) fwiw
-in setup 2 make sure alert type is set to both
-make sure that nav volume is not turned too low in relation to audio vol. ( use vol knob to access?)
-zoom toggle button can turn voice on/off
-do a system reset to defaults