Highway pegs

[loopy]

Would love some suggestions about type and model of highway pegs to purchase for my 2003 Wing.
Have seen some on Ebay but not sure.
Are the bars on the wing 1" or 1 1/4 inch to fit pegs onto.?

[topgun]

Diameter 1"
That's easy part

[loopy]

Thank you Topgin.
What make and type pegs have you?

[topgun]

Took a bit to locate them online as they were part of the used bike purchase; and didn't know model...
my friend also has these on his '03, a twin to mine in many ways;
https://www.denniskirk.com/kuryakyn/erg ... 499887.sku
very similar style here,
http://cyclemax.com/inc/sdetail/gl1800_ ... 111947/657

[Viking]

Just a note: If you have a 30-32 inch inseam, with the Kuryakyn set, get the 6" arms. If you have a 34 or more, get the 4 1/2 inch and keep in mind for the really long legged, there are also 2 1/2 inch available. I ended up with all three just getting to where I was comfy. I used the 6". I have a 31" inseam. This system also comes as boards for an extra hundred or so dollars.

[joeincalif]

I had the Kuryakyn pegs on my 08, I have seen some people with long legs mount them on the horizontal part of the crash bar.

[mamporrero]

Ergo II Cruise Mounts with Dually ISO Pegs (K4056)