All Balls Or OEM Fork seal kit


Information and questions on GL1800 Goldwings (2001-2017)
  • Sponsored Links
Post Reply
tomas65
Posts: 12
Joined: Sat Nov 19, 2016 5:55 pm
Location: Atwood illinois
Motorcycle: 2002 GL 1800

All Balls Or OEM Fork seal kit

Post by tomas65 » Sun Jan 14, 2018 8:11 pm



Getting ready to do a fork rebuild on my 02 Gl1800 trike. Big difference in price between All Balls kit & Honda OEM. My trike kit has the 6.5 easy steer rake kit also. Is Honda kit worth the extra $48?



User avatar
AZgl1800
Posts: 1111
Joined: Thu Oct 30, 2008 2:46 pm
Location: Lake Oologah Indian Territory USA
Motorcycle: '02 GL1800

Re: All Balls Or OEM Fork seal kit

Post by AZgl1800 » Sun Jan 14, 2018 9:19 pm

stick with the All Balls kit, it is tapered Timken bearings, OEM is ball bearings and they don't hold up well.
~John

DaveO430
Posts: 867
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: All Balls Or OEM Fork seal kit

Post by DaveO430 » Mon Jan 15, 2018 7:17 am

They look to me like the same parts, I have used both, so save some money.

User avatar
Steve F
Posts: 480
Joined: Thu Apr 07, 2011 8:25 pm
Location: suburban Chicago
Motorcycle: 1976 Honda CB750F Cafe' (sold :>( )
'03 GL1800
DARKSIDE RIDER

Re: All Balls Or OEM Fork seal kit

Post by Steve F » Mon Jan 15, 2018 7:21 am

I've heard stories either way, but when I had the forks rebuilt, I went with OEM seals and sliders too.
"To ride is the reason, the destination the excuse."

User avatar
themainviking
Posts: 3168
Joined: Wed Sep 29, 2010 6:59 pm
Location: North Bay, Ontario, Canada
Motorcycle: 2009 GL1800 AD
1987 Harley Softail Custom
1974 Harley FLH (sold)
1965 Harley FLHE (sold)
1957 Harley Chopper (sold)

Re: All Balls Or OEM Fork seal kit

Post by themainviking » Mon Jan 15, 2018 9:19 am

I also went with OEM when I did my front forks. Only because those parts were available when I needed them, and All Balls would have taken a week to ten days to get. OEM are excellent parts, but if the All Balls are readily available and $50 less for the kit, I think I might go with them. They do have a good reputation, but that could also just be for their bearings.
It ain't about the destination - it's all about the journey

Image

User avatar
Ghostman
Posts: 303
Joined: Fri Aug 14, 2009 10:52 am
Location: Midwest
Motorcycle: gl1800

Re: All Balls Or OEM Fork seal kit

Post by Ghostman » Mon Jan 15, 2018 11:03 am

Ive used both. At last rebuild I used All Balls and have had no issues whatever. To me either or works best.

tomas65
Posts: 12
Joined: Sat Nov 19, 2016 5:55 pm
Location: Atwood illinois
Motorcycle: 2002 GL 1800

Re: All Balls Or OEM Fork seal kit

Post by tomas65 » Mon Jan 15, 2018 3:09 pm

Ghostman wrote:
Mon Jan 15, 2018 11:03 am
Ive used both. At last rebuild I used All Balls and have had no issues whatever. To me either or works best.
How long you have them in? We're the All Balls just as easy to install as OEM? I've read some say the bushings on All Balls were triple coated and a bit harder to slide forks over

User avatar
Ghostman
Posts: 303
Joined: Fri Aug 14, 2009 10:52 am
Location: Midwest
Motorcycle: gl1800

Re: All Balls Or OEM Fork seal kit

Post by Ghostman » Tue Jan 16, 2018 9:26 am

Ive had them in about 4 years now and installing them was like installing the factory parts. I didnt notice any difference between the factory and the All Balls kit except the All Balls was more reasonably priced.

User avatar
tfdeputydawg
Posts: 992
Joined: Sun Nov 22, 2009 6:59 am
Location: Indianapolis, In.
Motorcycle: 06 Wing III/2010 Hannigan

Re: All Balls Or OEM Fork seal kit

Post by tfdeputydawg » Tue Jan 16, 2018 10:04 am

AZgl1800 wrote:
Sun Jan 14, 2018 9:19 pm
stick with the All Balls kit, it is tapered Timken bearings, OEM is ball bearings and they don't hold up well.
Fork rebuild does not normally include bearings :?:

User avatar
redbug
Posts: 421
Joined: Fri Sep 30, 2011 8:22 am
Location: Broken Arrow,Ok
Motorcycle: 1983 Gl1100I
1986 Harley FLHT

Re: All Balls Or OEM Fork seal kit

Post by redbug » Tue Jan 16, 2018 1:15 pm

Just watched a video on the ez steer system and they use tapered bearings in there builds. Maybe get a hold of them and see what is working best on there units.
" Ridin on Tulsa Time "

User avatar
GoldWingrGreg
Posts: 221
Joined: Tue Aug 24, 2010 7:18 am
Location: Zephyrhills, Florida
Motorcycle: 89 GL1500
03 GL1800
04 GL1800(abs)
05 GL1800(abs)
07 GL1800(abs)

Re: All Balls Or OEM Fork seal kit

Post by GoldWingrGreg » Wed Jan 17, 2018 6:11 pm

tomas65 wrote:
Sun Jan 14, 2018 8:11 pm
Getting ready to do a fork rebuild on my 02 Gl1800 trike. Big difference in price between All Balls kit & Honda OEM. My trike kit has the 6.5 easy steer rake kit also. Is Honda kit worth the extra $48?
Your Easy-Steer triple tree most likely came with All-Ball tapered bearings. With a 6.5 rack, and mileage greater then 20k on the bearings, you'll probably find heavy brinelling on the bearing races. Most will replace them with All-Ball bearings. Unfortunately, they are made from Chinese steel and expecting longer life is expecting to much. If you go to your trike builders web page, and look up Easy-Steer installation instructions, there you will find bearing torque. On trikes it is usually between 30-35 ft/lbs on the bearings.

User avatar
GoldWingrGreg
Posts: 221
Joined: Tue Aug 24, 2010 7:18 am
Location: Zephyrhills, Florida
Motorcycle: 89 GL1500
03 GL1800
04 GL1800(abs)
05 GL1800(abs)
07 GL1800(abs)

Re: All Balls Or OEM Fork seal kit

Post by GoldWingrGreg » Wed Jan 17, 2018 6:13 pm

GoldWingrGreg wrote:
Wed Jan 17, 2018 6:11 pm
tomas65 wrote:
Sun Jan 14, 2018 8:11 pm
Getting ready to do a fork rebuild on my 02 Gl1800 trike. Big difference in price between All Balls kit & Honda OEM. My trike kit has the 6.5 easy steer rake kit also. Is Honda kit worth the extra $48?
Your Easy-Steer triple tree most likely came with All-Ball tapered bearings. With a 6.5 rake, and mileage greater then 20k on the bearings, you'll probably find heavy brinelling on the bearing races. Most will replace them with All-Ball bearings. Unfortunately, they are made from Chinese steel and expecting longer life is expecting to much. If you go to your trike builders web page, and look up Easy-Steer installation instructions (or whatever name they use for their version of their easy-steer), there you will find bearing torque specs. On trikes it is usually between 30-35 ft/lbs on the bearings.



Post Reply