removing panel holding headlight adjustment & preload switches ??

awcain · Post by **awcain** » Tue Jan 23, 2018 12:29 pm

Have a 2015 GoldWing 1800.. Need to know how to remove the panel (upper right hand side) holding headlight adjustment and preload switches. thanks Bill

jinx · Post by **jinx** » Tue Jan 23, 2018 12:45 pm

you need to pull/pry the black trim off the take out the screw or screws holding the panel in. That is it. After the first time it is easy.
Prying the trim off is nerve racking the first time, mine are very tight fitting.

awcain · Post by **awcain** » Tue Jan 23, 2018 4:37 pm

jinx,
Thanks so much for your reply. Will tackle tomorrow. Bill

jinx · Post by **jinx** » Tue Jan 23, 2018 5:01 pm

Sorry should have said start at the bottom of the trim.

cihilb · Post by **cihilb** » Wed Jan 24, 2018 6:34 pm

jinx wrote: ↑Tue Jan 23, 2018 5:01 pm Sorry should have said start at the bottom of the trim.

And rock the strip slightly side to side to unclip it. Don't just pull up on it, you may break the little tabs.

removing panel holding headlight adjustment & preload switches ??

removing panel holding headlight adjustment & preload switches ??

Re: removing panel holding headlight adjustment & preload switches ??

Re: removing panel holding headlight adjustment & preload switches ??

Re: removing panel holding headlight adjustment & preload switches ??

Re: removing panel holding headlight adjustment & preload switches ??