Trunk brake light plug
-
- Posts: 2
- Joined: Fri Jul 25, 2014 9:32 am
- Location: Kodak
- Motorcycle: 2010 Glodwing
Trunk brake light plug
I have a 2017 'Wing' and want to change the outer brake light to a brake/running light like the inside lamps. Here is the problem. The plug, the ones that connect to the bulb receptacle, (this bulb receptacle has the standard 3 flat pit connectors), has only 2 wires, brake and ground. I have to connect a center wire for the running lights to work. I would like to use the OEM Honda horse shoe connector to complete this job. I cant find the part number from Honda (shocking), and can't find it on line... HELP!!!!
- Andy Cote
- Posts: 903
- Joined: Sun Feb 27, 2011 11:38 am
- Location: Windham, ME
- Motorcycle: 2015 Goldwing, basic black
Re: Trunk brake light plug
2015 Goldwing, basic black
Previously: GL1200 standard, GL1200 Interstate, GL1500 Goldwing, GL1500 Valkyrie Standard, 2000 Valkyrie Interstate, many other Hondas
Previously: GL1200 standard, GL1200 Interstate, GL1500 Goldwing, GL1500 Valkyrie Standard, 2000 Valkyrie Interstate, many other Hondas
-
- Posts: 2
- Joined: Fri Jul 25, 2014 9:32 am
- Location: Kodak
- Motorcycle: 2010 Glodwing
Re: Trunk brake light plug
Thanks... I called them and am going to pick it up tomorrow! Thanks again...