Hey folks. I'm trying to replace the screws that have decided to get up and walk away on my 2007 GL1800. They are the Hinge Patch Screws that hold the cover over the fork tubes. The parts book says they are located on the "Handlebar ~ Top Bridge" section of the Frame. Now, I've contacted my local shops and they don't thave them in stock. So, I was wondering if anyone here may know the size of these things. The Honda Part Number is: 90101-GE0-000 and I've found them on the internet, but it's just as easy to go to ACE and find a black screw...
Thanks folks.
Chuck
Hinge patch Screw
-
clgrimm519
- Posts: 7
- Joined: Fri Aug 25, 2017 12:44 am
- Location: Spokane, WA
- Motorcycle: 2007 GL1800 w/Lehman Monarch II Trike Kit
- Contact:
-
AZgl1800
- Posts: 2932
- Joined: Thu Oct 30, 2008 2:46 pm
- Location: Lake Oologah Indian Territory USA
- Motorcycle: 2009 Piaggio MP3 250cc https://imgur.com/foGDjgv
'02 GL1800 lives in Dawsonville, GA now.
My son is going to enjoy it for many years to come.
Re: Hinge patch Screw
I would just ask your friend Ace salesperson to let you take one out front and try it on the bike and see if it fits.
-
MikeB
- Posts: 3819
- Joined: Fri Dec 04, 2009 12:54 pm
- Location: Tacoma, WA
- Motorcycle: 1998 - GL1500 Aspencade
195K Miles
2017 - GL1800 Audio Comfort
32K Miles - Contact:
Re: Hinge patch Screw
Go to this listing https://www.ebay.com/itm/Honda-90101-GE ... 2708264492 for a picture of the screws.
They have a shoulder and a flange head.
May be difficult to find them are your local hardware store.
They have a shoulder and a flange head.
May be difficult to find them are your local hardware store.
MikeB
1998 - GL1500 w/195,500 miles ~ 2017 - GL1800 w/32,000 miles
USAF Avionics Communications Tech - 1968 - 1986 / Flight Engineer C-130E - C-141B - 1986 - 1992. Retired
Industrial Maintenance Tech - 1992 - 2014
Retired in Tacoma, WA
1998 - GL1500 w/195,500 miles ~ 2017 - GL1800 w/32,000 miles
USAF Avionics Communications Tech - 1968 - 1986 / Flight Engineer C-130E - C-141B - 1986 - 1992. Retired
Industrial Maintenance Tech - 1992 - 2014
Retired in Tacoma, WA
-
AZgl1800
- Posts: 2932
- Joined: Thu Oct 30, 2008 2:46 pm
- Location: Lake Oologah Indian Territory USA
- Motorcycle: 2009 Piaggio MP3 250cc https://imgur.com/foGDjgv
'02 GL1800 lives in Dawsonville, GA now.
My son is going to enjoy it for many years to come.
Re: Hinge patch Screw
Forget about Ace Hardware on that one, just suck it up, and order it from Honda.MikeB wrote: ↑Wed Jan 30, 2019 9:24 pm Go to this listing https://www.ebay.com/itm/Honda-90101-GE ... 2708264492 for a picture of the screws.
They have a shoulder and a flange head.
May be difficult to find them are your local hardware store.
-
newday777
- Posts: 2328
- Joined: Tue Jan 11, 2011 5:21 pm
- Location: Milford NH summer/fall & Oceanside, CA winters(N San Diego) with lots of miles riden between
- Motorcycle: 2008 Cabernet Red. Level 4
1983 GL1100A Wineberry 36,000 miles
1975 CB750 K5 Planet Blue 7,800 miles
1976 CB750 K6 Anterris Red 25,000 miles
Past rides
1999A Restored from PO neglect & sold at 19,000 miles
1999SE Totaled by cager at 105,000 miles
Re: Hinge patch Screw
clgrimm519
Welcome to the forum
These screws have the shoulder under the head to act as a stop so you don't crack the plastic it goes through to secure the part.
Welcome to the forum
These screws have the shoulder under the head to act as a stop so you don't crack the plastic it goes through to secure the part.
MikeB wrote: ↑Wed Jan 30, 2019 9:24 pm Go to this listing https://www.ebay.com/itm/Honda-90101-GE ... 2708264492 for a picture of the screws.
They have a shoulder and a flange head.
May be difficult to find them are your local hardware store.
s-l1600.jpg