honda goldwing motor trike kit
-
- Posts: 8
- Joined: Mon Dec 02, 2019 12:38 pm
- Location: lake city sc
- Motorcycle: 2002 Honda Goldwing 1800
honda goldwing motor trike kit
I have a 2002 Honda Goldwing with a motor trike kit, it has a ford pinto rear end, 7.5 gear 4 lug with drum brakes, I would like to change to disc brakes does anyone, know where I can buy a disc brake conversion kit
- AZgl1800
- Posts: 2932
- Joined: Thu Oct 30, 2008 2:46 pm
- Location: Lake Oologah Indian Territory USA
- Motorcycle: 2009 Piaggio MP3 250cc https://imgur.com/foGDjgv
'02 GL1800 lives in Dawsonville, GA now.
My son is going to enjoy it for many years to come.
Re: honda goldwing motor trike kit
I would call eTrailer.com on the phone
very helpful people, they have brake kits for a lot of different type axles and brake sizes.
https://www.etrailer.com/s.aspx?qry=Disc+Brakes
very helpful people, they have brake kits for a lot of different type axles and brake sizes.
https://www.etrailer.com/s.aspx?qry=Disc+Brakes
- 2003Cobra
- Posts: 129
- Joined: Sat Aug 03, 2019 4:29 pm
- Location: Bremen, GA
- Motorcycle: 2003 Goldwing GL1800 with a CSC Cobra trike kit.
1988 Harley Davidson Sportster
1985 Honda Saber VF1100 (Non-runner)
Re: honda goldwing motor trike kit
Might try Rockauto since you know what rear axle is installed.
2003 Goldwing GL1800 with CSC Cobra trike kit.
1988 Harley Davidson Sportster 883 with Hypercharger Bobber.
West GA Chapter 89 Southern Cruisers riding club.
1988 Harley Davidson Sportster 883 with Hypercharger Bobber.
West GA Chapter 89 Southern Cruisers riding club.
- GoldWingrGreg
- Posts: 1132
- Joined: Tue Aug 24, 2010 7:18 am
- Location: Zephyrhills, Florida
- Motorcycle: 89 GL1500
03 GL1800
04 GL1800(abs)
05 GL1800(abs)
07 GL1800(abs) - Contact:
Re: honda goldwing motor trike kit
If you are thinking that bolt-on calipers and rotors should work perfect from a parts store, you might fine that's not true. You'll probably need special mount plates to properly mount them, and delay valves for proper braking. Instead of discovering all that once you're fully involved, you might give Motor Trike a call. Some trike companies have ready to install kits available.
- ka4yqi
- Posts: 318
- Joined: Sun Jul 19, 2009 2:32 pm
- Location: Carrollton, Ga.
- Motorcycle: 2012 goldwing trike with RoadSmith hts1800 kit
2007 Kawasaki 1600 Nomad
1999 Honda Valkyrie Interstate
Sold = 1998 Goldwing Se - Contact:
Re: honda goldwing motor trike kit
Have you tried to get in touch with motor trike or a dealer? They should have a change over kit available.
-
- Posts: 8
- Joined: Mon Dec 02, 2019 12:38 pm
- Location: lake city sc
- Motorcycle: 2002 Honda Goldwing 1800
Re: honda goldwing motor trike kit
thank you for input but I do not think any one makes this kit as I have look for a long time. thank you again
Re: honda goldwing motor trike kit
https://mjtrikes.com/
Try Jim Murphy over here. They were making disc brake conversion kits for older drum brake Lehman trikes with similar rear ends.
Try Jim Murphy over here. They were making disc brake conversion kits for older drum brake Lehman trikes with similar rear ends.
-
- Posts: 20
- Joined: Sun Jun 03, 2012 4:06 pm
- Location: Grapevine, Texas
- Motorcycle: 1978 GL 1000 1800 Goldwing Trike
Re: honda goldwing motor trike kit
I would give Motor Trike A call first.
North Texas Patriot Guards Rider Member ..
-
- Posts: 5
- Joined: Tue Dec 08, 2020 8:18 pm
- Location: Boise
- Motorcycle: 2000 GL 1500 Trike
Re: honda goldwing motor trike kit
M&J Motorworks is no longer in business. We have been searching for other manufacturers who can supply disk brake conversion kits for the older Lehman Trikes with 4 lug Ford Pinto, Mustang II, Granda etc rear differentials.
- Swagonmaster
- Posts: 471
- Joined: Sun Apr 16, 2017 3:30 pm
- Location: Stokesdale, NC
- Motorcycle: 1990 gl1500 SE
Re: honda goldwing motor trike kit
You might try Wilwood Brakes, they sell hot rod brakes for a lot of old cars.
https://www.wilwood.com/BrakeKits/Brake ... option=All
https://www.wilwood.com/BrakeKits/Brake ... option=All
Try to learn from the mistakes of others..... you won't live long enough to make them all yourself!