suspension adjustment fault light
suspension adjustment fault light
I just replaced my rear shock spring and hose. I didn't zero out the adjustment because the dash indicator didn't work so i ordered a new switch. Now, I have the dash indicator, but I get a suspension adjuster fault flashing on the dash when I try to adjust it. The pump doesn't run either. So, I'm at a loss. Anybody ever run into this before? Any help would be greatly appreciated.
-
newday777
- Posts: 2341
- Joined: Tue Jan 11, 2011 5:21 pm
- Location: Milford NH summer/fall & Oceanside, CA winters(N San Diego) with lots of miles riden between
- Motorcycle: 2008 Cabernet Red. Level 4
1983 GL1100A Wineberry 36,000 miles
1975 CB750 K5 Planet Blue 7,800 miles
1976 CB750 K6 Anterris Red 25,000 miles
Past rides
1999A Restored from PO neglect & sold at 19,000 miles
1999SE Totaled by cager at 105,000 miles
Re: suspension adjustment fault light
Check the connector for the pump.
-
GoldWingrGreg
- Posts: 1195
- Joined: Tue Aug 24, 2010 7:18 am
- Location: Zephyrhills, Florida
- Motorcycle: 89 GL1500
03 GL1800
04 GL1800(abs)
05 GL1800(abs)
07 GL1800(abs) - Contact:
Re: suspension adjustment fault light
Make, model, year and mileage is almost always needed. Also, is this a 2-whl or 3 ???