2007 abs break light flashing


Information and questions on GL1800 Goldwings (2001-2017)
Post Reply
Roster
Posts: 2
Joined: Sat Apr 25, 2020 9:03 pm
Location: Climax NC
Motorcycle: 2007 Goldwing 1800

2007 abs break light flashing

Post by Roster »



My 2007 Goldwing ABS brake light has started to flashing and I just don't know why



User avatar
GoldWingrGreg
Posts: 751
Joined: Tue Aug 24, 2010 7:18 am
Location: Zephyrhills, Florida
Motorcycle: 89 GL1500
03 GL1800
04 GL1800(abs)
05 GL1800(abs)
07 GL1800(abs)
Contact:

Re: 2007 abs break light flashing

Post by GoldWingrGreg »

Do you have a Service Manual ???

Roster
Posts: 2
Joined: Sat Apr 25, 2020 9:03 pm
Location: Climax NC
Motorcycle: 2007 Goldwing 1800

Re: 2007 abs break light flashing

Post by Roster »

No I don't have a repair manual

User avatar
GoldWingrGreg
Posts: 751
Joined: Tue Aug 24, 2010 7:18 am
Location: Zephyrhills, Florida
Motorcycle: 89 GL1500
03 GL1800
04 GL1800(abs)
05 GL1800(abs)
07 GL1800(abs)
Contact:

Re: 2007 abs break light flashing

Post by GoldWingrGreg »

You should get a Service manual. Here are the diagnostic step. However, sometimes there can be confusion in the numbering of fuses #5, and 6. The 2 fuses you are looking for usually sit by them, and together, and are the same color (I believe 30amp fuses). Use a flashlight to see the numbering once the cover is off. The cover might identify them better. Be sure to test the fuses first.

1. Remove the No. 5 and 6 control motor fuses from the fuse box (10; page 17-4) with the ignition switch turned to OFF to be sure that each fuse is not burned out.
• If either fuse is burned out, perform the troubleshooting of problem code “4” (No. 5 fuse) or “5” (No. 6 fuse) without installing the fuse.
2. Turn the ignition switch to ON. The ABS indicator should come on.
3. Wait for 5 seconds and the ABS indicator goes off.
4. Install either the No. 5 or the No. 6 fuse immediately after the ABS indicator is off (within 3 seconds).
5. TheproblemcodeisindicatedbythenumberoftimestheABSindi- cator blinks.

Report back with your code.

To order a Service Manual, go here.

https://www.helminc.com/helm/product2.a ... itemtype=N



Post Reply