gl1800 trun signals
-
rohny brimstone
- Posts: 13
- Joined: Fri Sep 11, 2015 4:10 pm
- Location: moundsville wv
- Motorcycle: 2005 gl1800
gl1800 trun signals
hi I have an 05 gl1800 w 125k,bike has sat since oct 2019,( medical situation) now turn signals Woulnt work.4 ways work and horn works,I put a after market triple tree on w new stem bearings,changed coolant,changed brake fluid,I added a new isolated plug and play trailer harness,( turn signals worked then)have top section off, checking things out,now my turn signals don't work,any thing I should look for? where to start? thanks
-
Techdude2000
- Posts: 659
- Joined: Mon Jun 13, 2011 10:11 pm
- Location: Lexington, KY
- Motorcycle: 2004 GL1800
Re: gl1800 trun signals
Sorry, missed your post. Check the little green connector under the rubber cap on the top of the stem nut. The pins can bend and/or push out of it.rohny brimstone wrote: ↑Fri May 01, 2020 2:27 pm hi I have an 05 gl1800 w 125k,bike has sat since oct 2019,( medical situation) now turn signals Woulnt work.4 ways work and horn works,I put a after market triple tree on w new stem bearings,changed coolant,changed brake fluid,I added a new isolated plug and play trailer harness,( turn signals worked then)have top section off, checking things out,now my turn signals don't work,any thing I should look for? where to start? thanks