Left rear pocket compatability
-
- Posts: 3
- Joined: Fri Oct 16, 2009 9:19 am
- Location: Clarksville, Tn
- Motorcycle: 2001 gl1800 Roadsmith Trike
1982 GL1100I
Interstate
Left rear pocket compatability
On my 2001 Goldwing the rear pocket door will not stay closed. The problem is one of the holes is hollowed out. It is not the hinge itself. The door for 2001-2005 is on backorder with no ETA. The question: Is the entire pocket assembly from a 2006-2011 compatible (ie.. will it mount up and not looked jacked).
- GoldWingrGreg
- Posts: 763
- Joined: Tue Aug 24, 2010 7:18 am
- Location: Zephyrhills, Florida
- Motorcycle: 89 GL1500
03 GL1800
04 GL1800(abs)
05 GL1800(abs)
07 GL1800(abs) - Contact:
Re: Left rear pocket compatability
The 2006-17 are a completely different design and am pretty sure they will not fit. You will need another 2001-05 door. Have you tried eBay ???
-
- Posts: 3
- Joined: Fri Oct 16, 2009 9:19 am
- Location: Clarksville, Tn
- Motorcycle: 2001 gl1800 Roadsmith Trike
1982 GL1100I
Interstate
Re: Left rear pocket compatability
no new doors for a 2001-05 available on ebay, but was wondering if i bought the entire assembly for an 06-17 if it would mount and work. I understand that would would need the inner and outer parts of the pocket.
- keithg64
- Posts: 724
- Joined: Thu May 21, 2009 9:47 pm
- Location: Geneseo, IL
- Motorcycle: 2007 Gl1800HPNA Blue
2000 GL1500 Pearl Coranado Blue -sold
Re: Left rear pocket compatability
Most likely not since it is so different. Keep checking back with Ebay and ask in the other forum.
It's not what you buy, it's what you build.
- joeincalif
- Posts: 834
- Joined: Sat Nov 22, 2014 10:39 am
- Location: Fresno, Ca
- Motorcycle: 1997 Gold Wing SE
Re: Left rear pocket compatability
They seem to have them here
https://www.ronayers.com/oemparts/a/hon ... /trunk-box
https://www.ronayers.com/oemparts/a/hon ... /trunk-box

IF YOUR BORN ONCE YOU WILL DIE TWICE
IF YOUR BORN TWICE YOU WILL DIE ONCE
Re: Left rear pocket compatability
You could try here Ive had good luck with them.
https://pinwallcycle.com/advanced_searc ... ords=honda
https://pinwallcycle.com/advanced_searc ... ords=honda
- kwthom
- Posts: 235
- Joined: Fri Sep 01, 2017 10:36 am
- Location: Jaynes Station, AZ
- Motorcycle: 2016 GL1800
- Contact:
Re: Left rear pocket compatability
Interesting...
The 'door' is called LID in Honda-speak. I looked up the 'outer trunk pocket' (which is where the lid is attached...) - the old pocket is 82211-MCA-000. The current is 82211-MCA-A60.
82220-MCA-000 is the old lid. The new one? 82220-MCA-A60ZA
I looked up the parts on the link that @joeincalif referenced.
I think there's a reason the -000 parts are no longer called out on the -01 thru -05 parts listing. They've been superseded by these -A60xx parts.

The 'door' is called LID in Honda-speak. I looked up the 'outer trunk pocket' (which is where the lid is attached...) - the old pocket is 82211-MCA-000. The current is 82211-MCA-A60.
82220-MCA-000 is the old lid. The new one? 82220-MCA-A60ZA
I looked up the parts on the link that @joeincalif referenced.
I think there's a reason the -000 parts are no longer called out on the -01 thru -05 parts listing. They've been superseded by these -A60xx parts.
• "If I can't fix it, I'll fix it so nobody can!" ● Wait...I no longer have to fix it - I'm retired!
● Ken (IBA#50030) ● "Get busy living, or get busy dying." -Andy Dufresne, The Shawshank Redemption 1994 ● My blog ●

- GoldWingrGreg
- Posts: 763
- Joined: Tue Aug 24, 2010 7:18 am
- Location: Zephyrhills, Florida
- Motorcycle: 89 GL1500
03 GL1800
04 GL1800(abs)
05 GL1800(abs)
07 GL1800(abs) - Contact:
Re: Left rear pocket compatability
Unfortunately, all parts fishe that we look at online is aftermarket SW that allows a Honda dealer to run their day-to-day business. A Honda dealer, such as Ronayers, at the end of the day will take their internet orders, login to Honda's online web site and place their order. Only then does one find out real availability.joeincalif wrote: ↑Wed Jan 13, 2021 11:39 amThey seem to have them here
https://www.ronayers.com/oemparts/a/hon ... /trunk-box
-
- Posts: 3
- Joined: Fri Oct 16, 2009 9:19 am
- Location: Clarksville, Tn
- Motorcycle: 2001 gl1800 Roadsmith Trike
1982 GL1100I
Interstate
Re: Left rear pocket compatability
Agree with GoldWingrGreg 100%, but the question now is if I acquired the entire complete pocket assemble for the left side(inner, outer & door) from and 2006+ goldwing would it mount and be functional on a 2001-2005 goldwing and not look funny.
- kwthom
- Posts: 235
- Joined: Fri Sep 01, 2017 10:36 am
- Location: Jaynes Station, AZ
- Motorcycle: 2016 GL1800
- Contact:
Re: Left rear pocket compatability
Replacing plastic pieces on a 20 year old motorcycle isn't for the faint of heart.
If you're untrusting of the illustrated parts breakdown as shown on-line, you have options out there.

If you're untrusting of the illustrated parts breakdown as shown on-line, you have options out there.
• "If I can't fix it, I'll fix it so nobody can!" ● Wait...I no longer have to fix it - I'm retired!
● Ken (IBA#50030) ● "Get busy living, or get busy dying." -Andy Dufresne, The Shawshank Redemption 1994 ● My blog ●

- newday777
- Posts: 2087
- Joined: Tue Jan 11, 2011 5:21 pm
- Location: Milford NH summer/fall & Oceanside, CA winters(N San Diego) with lots of miles riden between
- Motorcycle: 2008 Cabernet Red. Level 4
1983 GL1100A Wineberry 36,000 miles
1975 CB750 K5 Planet Blue 7,800 miles
1976 CB750 K6 Anterris Red 25,000 miles
Past rides
1999A Restored from PO neglect & sold at 19,000 miles
1999SE Totaled by cager at 105,000 miles
Re: Left rear pocket compatability
Finding someone who has tried to change between them will be like finding the needle in the haystack. Most just buy the correct part if needed.jobrien wrote: ↑Mon Jan 11, 2021 7:43 pmOn my 2001 Goldwing the rear pocket door will not stay closed. The problem is one of the holes is hollowed out. It is not the hinge itself. The door for 2001-2005 is on backorder with no ETA. The question: Is the entire pocket assembly from a 2006-2011 compatible (ie.. will it mount up and not looked jacked).
Some years ago, there were posts on another forum, on using wire looped through holes burned into the door and pocket hinge areas to secure the door to the pocket when hinges broke. That would be a quick fix for your situation if you have the door still.