Just replaced nav screen on 2012 Wing. Old screen was fading out & occasionally flickering, then clearing some. No issues with the replacement, however, I now have a "lit", blank screen. I have cleaned & gone over all the internal & external dash connections several times. Checked all the fuses, Metered the ribbon feeding the screen for continuity. I've even swapped the old screen back in & it's now blank. I'm really hoping the board feeding the screen isn't burnt, but don't know where to go from here. All the dash instruments & audio work, but I'm getting a double beep when I try to engage the nav. (Just guessing on that cause the screens blank) So, I'm assuming there may be a Nav issue.
Anyone have any ideas. I don't have any wiring diagrams & don't know where to start at this point.
Blank Nav screen
-
AZgl1800
- Posts: 2932
- Joined: Thu Oct 30, 2008 2:46 pm
- Location: Lake Oologah Indian Territory USA
- Motorcycle: 2009 Piaggio MP3 250cc https://imgur.com/foGDjgv
'02 GL1800 lives in Dawsonville, GA now.
My son is going to enjoy it for many years to come.
Re: Blank Nav screen
I am sending you a PM,
check it for some help.
check it for some help.