Rear brake bleeding

[The Wolf]

I’m working on 2006 w/abs brakes . Replaced rear master cylinder and doing the bleeding of brakes and on the 2 nd bleed point(lower front right bleed valve, I don’t get any fluid out. I’m using a vacuum system, pumping pedal and then holding down, then loosen bleed valve. No fluid. BUt if I release pedal and open the valve I get-fluid coming out. The diagram in book shows that this brake line is coming from the delay valve.

Any help would be appreciated.

[GoldWingrGreg]

Is yours a trike ???

[The Wolf]

No not a trike- I finished bleeding all the other valves and brakes are ok now. Thx!