GL1500 and GL1800 parts now available in the store

[WingAdmin]

I have a huge stock of (mostly) GL1500 and GL1800 parts here. There are some accessories that would fit any motorcycle, but for the most part the parts are specific to the GL1500 and GL1800. I have everything from plastic body parts to frames to swingarms and more - hundreds and hundreds of items.

The vast majority of parts are used, but there are a few new-in-package parts (mostly accessories) and a few new-but-not-in-package parts.

I've been wanting to set up an automated online store for ages, but time constraints are putting a damper on that, so I wrote a quick page to just get the stuff online and show what I have. Only a tiny portion of my inventory is online at this point, but I am constantly adding more as I get time to photograph and enter it.

Check it out here: New and Used Goldwing Parts

[mstcitabria73]

Looking for the small black plastic trim piece that fits beside the reflector on the right side fairing. If anyone has this item for sale please contact me, thanks.....Mike T.

[Chickenlegs]

Looking for driver foot pegs for my 97 1500 A

[Chickenlegs]

make that 1800 foot pegs

[moparnut38]

I am looking for this trunk that I have marked in red outline. It is for a GL1500. I just messaged you as well.
It a pearl silver 2 tone

[PAINTHORSE1234]

I AM STILL LOOKING FOR THE LOWER TRUNK POCKETS COMPLEAT FOR A 1500

[rigger39]

hi, i am looking for a left side trunk pocket lid for my 1990 1500gl. new ones have been discontinued so am looking for second hand, doesn`t have to be a working hinge one as i will be gluing this one in. have lost 2 now so 3rd time lucky. many thanks for your time. kind regards andy

[tprender]

I was wondering if you might have 2 items that I didn't see listed(or I missed them) for my 1500. I need the lower front fender(white if possible) and the right glove box/pocket(black) cover.

[WingAdmin]

The inventory is changing - so check the online store - if it's in there, then we have it. We haven't cataloged everything yet, but we're getting there...

[bstig60]

i'm looking for the rear part of the front fender on my 03 GL1800 in Black. Would you have one of those with all the tabs on it?

[jinx]

Looking for fuse panel cover for a 2006 gl1800. Must have A7 not H0 in the upper right corner.
Part # 38252-MCA-A61 for wiring harness part # 32100-MCA-A71.

This must be used. New ones are blank and don't include the label.

[keithgrg357]

I need a METER PANEL VISOR 64255-MCA-A600 for my 2006 Goldwing trike. I would like to get one ASAP before I forget how to put the bike back together! Do you have one for sale? My email....... "keithgrg357@aol.com"

[golden highway]

I am looking for the air shock control switches for my GL1500

[keithgrg357]

I need a METER PANEL VISOR 64255-MCA-A600 for my 2006 Goldwing trike. I would like to get one ASAP before I forget how to put the bike back together! Do you have one for sale? My email....... "keithgrg357@aol.com"

I finally found one, a new old stock from Greenes in Kentucky. It was for a 2005 and the GPS antenna wouldn't mount inside but I planned to move it outside on top of the visor anyway.

[Retro1]

Looking for the adjusting nut that locks the seat back-rest in place on my 1988 Goldwing.
Don't know when it must've slipped off.
Thank you.

[glassbebo]

Looking for a radio unit for a 99 or 2000 SE.
Thanks Bill