Wanted : GL1100 engine hanger bolts

[sacruickshank]

At some point in it's life, the OEM engine hanger bolts for my '83 GL1100 were replaced with undersized bolts whose threads have now stripped.

Does anyone have replacements in decent condition?

Part numbers
90152-371-000 (M12 x ???mm)
90153-371-000 (M10 x ???mm)

Thanks

[Wilcoy02]

Which bike are you looking for?
From Honda parts catalog for 83's
Gl1100 3 of this # 90152-371-000
Gl1100 asp 3 90152-463-770
GL1100 ins 3 " " " "

[sacruickshank]

It's a standard '83 GL1100, not an Aspy or Interstate

Not sure why you reference the "3" bolts, I'm only saw two during the disassembly and studying the engine, front lower (the M12x270) and upper rear (M10x300). They are definitely different sizes, or at least the openings are. The existing bolts that came out were a hack job from earlier in it's life. Wrong size, stripped threads, etc.

I've found a source on FB, but they haven't arrived yet to verify size.

[burgerdude]

That engine support is M12 x 1.25 x 300mm it is best to use nylock style nuts as the threads may be beat down from the years of wear. 90152-371-00 is the Honda part number. It is listed as Bolt, FR Engine Hanger.

[mito57]

Look here:

https://www.ebay.com/itm/334067930837