I replaced the entire wiring harness and installed all new LED lights. The rear are School Bus lights from Superbright LEDs. I added side marker lights to all four corners. Also on the rear is a Ghost strobe third brake light made for emergency vehicles by Sound Off Signal. I surrounded the rear lights with aluminum diamond tread plate for appearance and visibility. CAN YOU SEE ME NOW? The plug is six prong round RV (five in use) but easily converted to any other style including four flat.
I removed the ball coupler and installed a new swivel hitch, new coupler, new safety chains, a wheeled tongue stand (not a jack) and a lift handle. Easy to lift, move and tow.
I replaced the lid hold down latches and used new stainless hardware. I also replaced all four leveling jacks.
The tent is excellent with vinyl roof, canvas sides, screens all in good shape. The inside table was particle board with a broken corner so I removed it completely. I then cut pieces of finish grade ¾” plywood for the mattresses. It has a piece of artificial turf lying (not glued) on the floor that should be replaced.
I repacked the wheel bearings by hand and installed two new Carlisle tires with metal valve stems and Dynabead balancing beads.
Includes the front awning with poles, ropes and stakes. It has a large removable toolbox on the tongue with a new lock and chrome hubcaps.
I will get it set up outside and post some more pictures as soon as I can. Any questions, PM, call or e-mail.
Asking $1850.
Andy 207-892-0660