Parts left over from trikes, GL1500 stuff.

[CrystalPistol]

I'm gonna post a list of stuff I have that I no longer have a need for. These parts came from GL1500s after they were triked. You can PM me with details of needs, etc.
I have at present:
2 …. rear brake rotors, 316mm OD. (1990-2000) Both are a hair over 7.4mm thick (6.0mm is service limit)
6 …. GL1500 unaltered drive shafts with good splines
2 …. GL1500 Final Drives (one has 92,xxx miles, the other ???)
2 …. swing arms (pretty big to ship I think?)
2 …. GL1500 rear wheels with spline adapters (but old tires I wouldn't use, I'd cut the tires off myself)
2 …. rear axles
1 …. Decent (not sloppy) GL1500 Universal Joint (not a Valk joint, likely 1993 vintage)
3 …. GL1500 rear brake caliper brackets that go with the 316mm rotors (Not 1988 or '89 vintage, but am told the larger 316mm rotor can be used on a '88-'89 with matching bracket)
some saddle bag guards
a pair of saddle bag tail lights
some misc small "bits"


Not in a rush, but I am ready to let them go. If see something you need or want, PM me, I can probably work with you. I may find more after Christmas and if I do I'll post it here. If you don't see something you need, ask.


Some of these parts were collected by me years ago as I was gonna put a GL1500 rear / etc in my GL1200, but it's gone now, so no more need. Other parts just came my way as time passed & I hated to toss them.

[CrystalPistol]

Update:
I have no extra good looking mufflers, I only mention as some have asked. I had some but they were too far gone and I pitched them.


I do have one used "chrome" GL1500 center stand, I don't know if it's a OEM been chromed or a ride on/off?
I do have one OEM side stand, it's OEM black.

[CrystalPistol]

01-17-2020 update to add or subtract stuff.

These parts came from GL1500s after they were triked. You can PM me with details of needs, etc.

I have at present … it's changed …

6 …. GL1500 unaltered drive shafts with good splines
2 …. GL1500 Final Drives (one has 92,xxx miles, the other ???)
2 …. swing arms (pretty big to ship I think … but they'll fit the scrap metal dumpster, they do take up room)
2 …. GL1500 rear wheels with spline adapters (but old tires I wouldn't use, I'd cut the tires off myself … that may yet get used for a small trailer)
2 …. rear axles
2 …. Decent (not sloppy, not "loose") GL1500 Universal Joints (not a Valk joint, likely 1993 vintage) Yeah, I found another box.
3 …. GL1500 rear brake caliper brackets that go with the 316mm rotors (Not 1988 or '89 vintage, but am told the larger 316mm rotor can be used on a '88-'89 with matching bracket)
some saddle bag guards
a pair of saddle bag tail lights
some misc small "bits"
some saddle bag cables
some helmet lock things that go under travel trunk
an OEM alternator needs a bearing I think, has a "click" when spun by hand?
an OEM alternator that is quiet when turning, likely just needs brushes?


Not in a rush, but I am ready to let them go. If see something you need or want, PM me, I can probably work with you. If you don't see something you need, ask with a PM. Some of these parts were collected by me years ago as I was gonna put a GL1500 rear / etc in my GL1200, but it's gone now, so I have no more need of them. Other parts just came my way as time passed & I hated to toss them.

I have NO extra good looking mufflers, I only mention as some have asked. I had some but they were too far gone and I pitched them.

I do have one used "chrome" GL1500 center stand, I don't know if it's a OEM that's been chromed or a ride on/off?
I do have one OEM side stand, it's OEM black.

You'll notice, any rotors are gone ... or spoken for.

Later on in Spring, I'll go through another box of unused or spare no longer needed or still working used J&M headset stuff. Might come up with some jackets or helmets too?