1981 GL1100 parts bike fpr sale

[fullbody12]

I have a 1981 GL1100 Interstate that was given to me in Feb of 2018. I removed the heads to check the cylinders and everything looked great. I put on new valve seals, new head gaskets and replaced the heads. I then rebuilt the carbs, front forks, rear shocks, and both master cylinders and all three calipers. After installing 2 new Dunlop tires in Oct 2019, I was road ready. I rode to my friends house that gave me the bike and we were off. 54 miles later it dropped a valve in the #3 cylinder. I don't have the energy to try to find parts and rebuild this bike again, so I'm hoping someone out there has the parts and the desire to get it running again. I have a clear title. The bike looks pretty good for sitting under a shed in northeast Texas for 26 years. Asking $500.00. Pick up in Waskom, TX or buyer arranges shipping.

[38wing]

would u sale parts off of the bike I need a left control switch the one with the starter button that is not cracked

[fullbody12]

I'm going to try to sell it in one piece. If I decide to part it out, I will contact you.

[Good Hondog]

I need a left control switch the one with the starter button that is not cracked

If you really mean the side with the starter button, that's the right side. Those are available brand new reproduction from Parts N More (and other suppliers too). Part #12-0303 on the Parts N More website. I bought one a couple of years ago from them and it's perfect. I wish they would start producing the left side assemblies too.

[Chewy]

would u sale parts off of the bike I need a left control switch the one with the starter button that is not cracked

I have an extra from my 81 parts bike. Don't know what it's worth, but I do know it is in good condition.