IN Need of three items to complete my 95 Aspencade SE
-
- Posts: 27
- Joined: Sat Oct 03, 2020 5:17 pm
- Location: Kaslo, BC, Caada
- Motorcycle: 1995 Aspencade SE
IN Need of three items to complete my 95 Aspencade SE
I need three items as follows
Axle nut wrench for rear axle
Air Hose for pumping tires
Original Owners manual.
Would need to be shipped to Canada - At my expense.
Let me know what you have and what you need for it (them?)
Axle nut wrench for rear axle
Air Hose for pumping tires
Original Owners manual.
Would need to be shipped to Canada - At my expense.
Let me know what you have and what you need for it (them?)
- MikeB
- Posts: 4125
- Joined: Fri Dec 04, 2009 12:54 pm
- Location: Tacoma, WA
- Motorcycle: Current
1998 - GL1500 Aspencade
205K Miles
2017 - GL1800 Audio Comfort
46K Miles
Previous
SOLD 1999 - GL1500, 161K Miles
SOLD 2003 - GL1800 ABS w/117K - Sold
SOLD 2003 - GL1800 w/67K Miles
SOLD 2001 - ST1100 w/33K Miles - Contact:
Re: IN Need of three items to complete my 95 Aspencade SE
I use an 1-1/16" wrench for the rear axle nut. Should be able to find one easily somewehre near you.
You do not need a hose to fill tires using the onbaord compressor. It is not a good idea to use the onboard compressor for that. A $10 - $20 compressor from your local department store is a better idea. The onboard compressor is needed for the rear suspension and if it fails, it can cost you in excess of $300 for a replacement if you can find one.
Read through this post to know more about your onbaord compressor. viewtopic.php?f=6&t=2913
Check Ebay for an owners manual. eBay item number: 362790268982
MikeB
1998 - GL1500 w/205,500 miles ~ 2017 - GL1800 w/46,000 miles
USAF Avionics Communications Tech - 1968 - 1986 / Flight Engineer C-130E - C-141B - 1986 - 1992. Retired
Industrial Maintenance Tech - 1992 - 2014
Retired in Tacoma, WA
1998 - GL1500 w/205,500 miles ~ 2017 - GL1800 w/46,000 miles
USAF Avionics Communications Tech - 1968 - 1986 / Flight Engineer C-130E - C-141B - 1986 - 1992. Retired
Industrial Maintenance Tech - 1992 - 2014
Retired in Tacoma, WA
- Andy Cote
- Posts: 1183
- Joined: Sun Feb 27, 2011 11:38 am
- Location: Windham, ME
- Motorcycle: 2015 Goldwing, basic black
Re: IN Need of three items to complete my 95 Aspencade SE
I agree with MikeB that any brand wrench will work and a aftermarket air compressor is perhaps more convenient for routine use. If you just want to "fill in the kit" so to speak, you may have to just keep an eye on the used market. The hose was an accessory, Honda or aftermarket.
If in a hurry, the manual is here:
https://www.helminc.com/helm/Result.asp ... d%5Fmedia=
And the tools are available from Honda. here is the isometric exploded parts view and parts list:
https://www.partzilla.com/catalog/honda ... g-se/tools
I am unsure of shipping to Canada under current conditions.
If in a hurry, the manual is here:
https://www.helminc.com/helm/Result.asp ... d%5Fmedia=
And the tools are available from Honda. here is the isometric exploded parts view and parts list:
https://www.partzilla.com/catalog/honda ... g-se/tools
I am unsure of shipping to Canada under current conditions.
2015 Goldwing, basic black
Previously: GL1200 standard, GL1200 Interstate, GL1500 Goldwing, GL1500 Valkyrie Standard, 2000 Valkyrie Interstate, many other Hondas
Previously: GL1200 standard, GL1200 Interstate, GL1500 Goldwing, GL1500 Valkyrie Standard, 2000 Valkyrie Interstate, many other Hondas
-
- Posts: 27
- Joined: Sat Oct 03, 2020 5:17 pm
- Location: Kaslo, BC, Caada
- Motorcycle: 1995 Aspencade SE
Re: IN Need of three items to complete my 95 Aspencade SE
Ok thanks gents. I know About using shop tools to do the job just think it would be nice to have a complete original tool kit. As for the compressor, good point. Will get a cheap one from wallys world. for the same reason as the tool kit I would like to find an original 95 Aspencade SE owners manual.
- Andy Cote
- Posts: 1183
- Joined: Sun Feb 27, 2011 11:38 am
- Location: Windham, ME
- Motorcycle: 2015 Goldwing, basic black
Re: IN Need of three items to complete my 95 Aspencade SE
Understand about the wrench. I believe the same wrench is used on other models so if you are waiting for a used one, keep an open mind.
The link to Helm, Inc. is the original. Honda contracts with Helm to distribute all their manuals.
The link to Helm, Inc. is the original. Honda contracts with Helm to distribute all their manuals.
2015 Goldwing, basic black
Previously: GL1200 standard, GL1200 Interstate, GL1500 Goldwing, GL1500 Valkyrie Standard, 2000 Valkyrie Interstate, many other Hondas
Previously: GL1200 standard, GL1200 Interstate, GL1500 Goldwing, GL1500 Valkyrie Standard, 2000 Valkyrie Interstate, many other Hondas
-
- Posts: 27
- Joined: Sat Oct 03, 2020 5:17 pm
- Location: Kaslo, BC, Caada
- Motorcycle: 1995 Aspencade SE
Re: IN Need of three items to complete my 95 Aspencade SE
does Helm distribute Printed Paper manuals??
- Andy Cote
- Posts: 1183
- Joined: Sun Feb 27, 2011 11:38 am
- Location: Windham, ME
- Motorcycle: 2015 Goldwing, basic black
Re: IN Need of three items to complete my 95 Aspencade SE
2015 Goldwing, basic black
Previously: GL1200 standard, GL1200 Interstate, GL1500 Goldwing, GL1500 Valkyrie Standard, 2000 Valkyrie Interstate, many other Hondas
Previously: GL1200 standard, GL1200 Interstate, GL1500 Goldwing, GL1500 Valkyrie Standard, 2000 Valkyrie Interstate, many other Hondas
-
- Posts: 27
- Joined: Sat Oct 03, 2020 5:17 pm
- Location: Kaslo, BC, Caada
- Motorcycle: 1995 Aspencade SE
Re: IN Need of three items to complete my 95 Aspencade SE
THX
Ordered what I need.
Ordered what I need.
- detdrbuzzard
- Posts: 1725
- Joined: Thu Oct 23, 2008 5:54 am
- Location: 42.23/83.33/636
- Motorcycle: '11 bmw 1200gsa,'93se
'75750.'79750/9k
'79 750f
'06 st1300a
Re: IN Need of three items to complete my 95 Aspencade SE
check with your honda dealer for an owners manual also
'99 ST1100, '93 se
'75 cb750k, '79 cb 750f, '79 cb750 superK
'99ST1100, sunL70
'06 ST1300a
.... william
'75 cb750k, '79 cb 750f, '79 cb750 superK
'99ST1100, sunL70
'06 ST1300a
.... william
- Rambozo
- Posts: 3981
- Joined: Sun Apr 01, 2018 8:36 pm
- Location: Disneyland
- Motorcycle: 1992 GL1500 Aspencade
Ducati Monster
Re: IN Need of three items to complete my 95 Aspencade SE
Cyclemax has the hose. I can't find it on their website at the moment, but they have it listed on ebay.
https://www.ebay.com/itm/GOLDWING-GL150 ... 1394909635
BTW, Aspencade and SE are two different models of Goldwing.
https://www.ebay.com/itm/GOLDWING-GL150 ... 1394909635
BTW, Aspencade and SE are two different models of Goldwing.
-
- Posts: 27
- Joined: Sat Oct 03, 2020 5:17 pm
- Location: Kaslo, BC, Caada
- Motorcycle: 1995 Aspencade SE
Re: IN Need of three items to complete my 95 Aspencade SE
I am aware of that I always think of the SE as fully optioned Aspencade hence the wording.
Re: IN Need of three items to complete my 95 Aspencade SE
(BOLD) I found a 6 point flat thick sheet metal wrench at a Thrift Store, $3.00.
Similar to lower wrench in the picture below.
The top wrench can be filed to size, might take an hour.
Dreams are good. If they were real, most would not be alive.
Next time you wake up, smile, you have another fine day to live.
Next time you wake up, smile, you have another fine day to live.