WTB: Junk 1500 side covers

[Quick Cal]

I have a couple of missing mounting studs. I know you can get plastic replacements and jb weld them on. But the video I seen didn't look like that worked too good. I would rather try to get some studs off an oem cover and try to use abs glue.

I don't care what shape they're in as long as the studs are good.

Please let me know if you have anything. Thanks

[Rambozo]

You can fashion your own from ABS rod with some files and a drill. You can get ABS rods from a local hobby store, McMaster Carr, Amazon, etc. You can also get them from almost any Honda bike, and probably others.

[Quick Cal]

I got lucky and found a junk side cover with one good tab. Wasn't the exact one I needed as it leaned the wrong way, but I made it work. And the po had tried to glue another broken one but failed. The glue scraped right off. Luckily it was a clean break and it was an easy repair.

I just now finished tacking the tabs on with abs glue. Tomorrow I'll make some slurry following Scott's instructional video and finish it up. I'll let it cure for several days I think.