Odd issue with Cornering lights.


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Post Reply
dstaff
Posts: 33
Joined: Wed Dec 14, 2016 8:48 am
Location: Ottawa, Ont Canada
Motorcycle: 2000 GL-1500 SE

Odd issue with Cornering lights.

Post by dstaff » Sun Jun 03, 2018 7:10 am



Hi
So I have just swapped out all the turn signal and tail light bulbs for LEDs. I also changed and rewired the signal and hazard relays. Now when I indicate a turn, the cornering lights flash with the indicators, not stay on solid. The relays I used are a standard 3 prong electronic relay rated for LEDs and 2-6 bulbs. And suggestions and how to stop them from flashing?

Also my taillight warning light on the dash has come on. I’m assuming this is because of the difference in resistance between the LED’s and incandescent bulbs. My plan for that is just pull the bulb when I swap all the dash lights for lEDs.

Oh and BTW just swapping the headlight and it side lights, the turn signals and brake lights has made a big difference on the electrical draw on the system.



Post Reply