1979 gl1000 timing belt?


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
Post Reply
Naked Wing rider
Posts: 14
Joined: Tue Sep 18, 2018 6:30 pm
Location: Calhoun Ga
Motorcycle: 1979 honda goldwing gl1000

1979 gl1000 timing belt?

Post by Naked Wing rider » Mon Sep 24, 2018 11:19 am



Hi I'm getting ready to do my timing belts.
My question is. What is the best way to get your timing right?

I was thinking about randakks timing degree wheel. But I don't know much about it.

What would be your suggestions?

And assume the timing is off. The guy I got it off replaced the over 3 years ago and don't think it was done right.



DaveO430
Posts: 1058
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: 1979 gl1000 timing belt?

Post by DaveO430 » Mon Sep 24, 2018 11:59 am

If you go by the timing belt tutorial in the how to's you have to be a dunce to mess it up. The ignition timing is another thing, takes patience and an understanding of how to set the points.

Naked Wing rider
Posts: 14
Joined: Tue Sep 18, 2018 6:30 pm
Location: Calhoun Ga
Motorcycle: 1979 honda goldwing gl1000

Re: 1979 gl1000 timing belt?

Post by Naked Wing rider » Mon Sep 24, 2018 12:01 pm

The guy told me it does not have point ignition anymore. It's been changed to electric.

Are those adjustable?

User avatar
SnoBrdr
Posts: 671
Joined: Fri Mar 07, 2014 9:01 am
Location: Providence, Rhode Island
Motorcycle: 1978 GL 1000

129K Original Owner

Re: 1979 gl1000 timing belt?

Post by SnoBrdr » Mon Sep 24, 2018 12:52 pm

Naked Wing rider wrote:
Mon Sep 24, 2018 12:01 pm
The guy told me it does not have point ignition anymore. It's been changed to electric.

Are those adjustable?
It depends on what kind/brand.

You should try to find out, some can tell just by looking at a picture of the plate.

User avatar
dingdong
Posts: 3515
Joined: Thu Apr 08, 2010 8:35 am
Location: Oklahoma City
Motorcycle: 1976 gl1000
1993 gl1500
2004 NRX1800 Rune

Re: 1979 gl1000 timing belt?

Post by dingdong » Mon Sep 24, 2018 3:41 pm

If you are just replacing the belts, you don't need to be concerned about ignition timing. The belt pulleys just have to be timed (aligned) to the alignment markers. Which is covered in the tutorial.
Tom

John F. Kennedy would be impeached by todays liberal Democratic socialist party.

Naked Wing rider
Posts: 14
Joined: Tue Sep 18, 2018 6:30 pm
Location: Calhoun Ga
Motorcycle: 1979 honda goldwing gl1000

Re: 1979 gl1000 timing belt?

Post by Naked Wing rider » Wed Sep 26, 2018 12:56 pm

Ok just changed the belts. Just have to get the cover back on.

Thanks for the push to do it my self. Saved me $100 from what local mechanics charge.

User avatar
SnoBrdr
Posts: 671
Joined: Fri Mar 07, 2014 9:01 am
Location: Providence, Rhode Island
Motorcycle: 1978 GL 1000

129K Original Owner

Re: 1979 gl1000 timing belt?

Post by SnoBrdr » Wed Sep 26, 2018 1:04 pm

Naked Wing rider wrote:
Wed Sep 26, 2018 12:56 pm
Ok just changed the belts. Just have to get the cover back on.

Thanks for the push to do it my self. Saved me $100 from what local mechanics charge.
$100 is cheap.

Naked Wing rider
Posts: 14
Joined: Tue Sep 18, 2018 6:30 pm
Location: Calhoun Ga
Motorcycle: 1979 honda goldwing gl1000

Re: 1979 gl1000 timing belt?

Post by Naked Wing rider » Wed Sep 26, 2018 6:01 pm

$100 just in labor but still not bad.

User avatar
SnoBrdr
Posts: 671
Joined: Fri Mar 07, 2014 9:01 am
Location: Providence, Rhode Island
Motorcycle: 1978 GL 1000

129K Original Owner

Re: 1979 gl1000 timing belt?

Post by SnoBrdr » Wed Sep 26, 2018 6:09 pm

Naked Wing rider wrote:
Wed Sep 26, 2018 6:01 pm
$100 just in labor but still not bad.
If you go to a "real" shop it's over $200 in labor.



Post Reply