Pin-out for clock connector GL1500A

Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Post Reply
Posts: 5
Joined: Tue Jan 01, 2019 2:27 pm
Location: Gloucester, VA
Motorcycle: 1997 GL1500A w/ MotorTrike

Pin-out for clock connector GL1500A

Post by CaptKen » Tue Jun 04, 2019 12:11 pm

My G1500a trike has lost ability to hold time after engine shutdown. Key sw on and the clock works fine, just has to be reset. Does any one know where I can find a pin diagram of the display module connector?

User avatar
Posts: 3
Joined: Mon Mar 25, 2019 1:40 pm
Location: Northfield, Minnesota
Motorcycle: 2000 GL1500SE

Re: Pin-out for clock connector GL1500A

Post by LSlinger » Tue Jun 04, 2019 12:55 pm

If you get an answer to this I'd like to know what it is, because every time I start my bike it's always 2:30. I can set the current time and as long as the key is turned on the clock works just fine but as soon as you turn off the key and turn the key back on it 2:30 again. Just like Ground Hogs Day!

User avatar
Posts: 2592
Joined: Fri Dec 04, 2009 12:54 pm
Location: Tacoma, WA
Motorcycle: 1998 - GL1500 Aspencade.
2003 - GL1800A
2017 - GL1800 Audio Comfort

Re: Pin-out for clock connector GL1500A

Post by MikeB » Tue Jun 04, 2019 1:33 pm

Read through this post. There is a fuse you need to check.
Tacoma, WA, USA

Post Reply