GPS to Goldwing input device - GL1200
-
Papajohn88
- Posts: 4
- Joined: Sun Oct 06, 2019 5:30 pm
- Location: Anderson, indiana
- Motorcycle: 1986 GL1200A
1992 GL1500SE
GPS to Goldwing input device - GL1200
I need the instructions for hooking my recently received GPS Input Device up to my 86 goldwing aspencade. Where can I find them?
-
WingAdmin
- Site Admin
- Posts: 23398
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer - Contact:
Re: GPS to Goldwing input device - GL1200
The GPS Input is designed for the GL1500 and GL1800 - the connector on it is not the same as is found on the GL1100 and GL1200. It is electrically compatible, but you would have to cut the connectors off of the GPS Input and solder on a pair of 5-pin DIN connectors (one male, one female) in their place in order to get it to work. Alternately, you could modify your existing pigtail (the cable that plugs into the component terminal box in the bike on one end, and your helmet cable pugs into the 5 pin DIN connector on the end) by cutting it open and splicing into the wires.Papajohn88 wrote: ↑Sat Mar 07, 2020 10:05 am I need the instructions for hooking my recently received GPS Input Device up to my 86 goldwing aspencade. Where can I find them?
If you feel capable of doing that, I can look up the wires and connectors you would need to modify.