Need to connect lights to the mirrors and light bars above the cyclinder (?) covers. What or where can I find the wire colors that will match to these lights.
Tried to find a manual to download but no luck there.
Thanks for any help you can offer.
Need wiring assist
-
- Sponsored Links
-
- Posts: 3
- Joined: Wed Jun 23, 2010 7:29 pm
- Location: wyocena,wi
- Motorcycle: 2007 Goldwing 1800
-
- Posts: 319
- Joined: Mon Oct 26, 2009 4:51 pm
- Location: Baton Rouge, LA
- Motorcycle: 2008 GL1800 Prem Audio
Re: Need wiring assist
well, if you remove the screw below the mirror housing, you will get access to the blinker wires...you could use a light tester to figure out which wire is the runnning light circuit and which is the turn signal circuit, then connect the wires from your new lights appropriately. According to my manual, there will be three wires at the front turn signals, on the right side:
light blue - blinker ckt pos
green - ground
light blue w/white stripe - running light ckt pos
same with left side, except the blue is orange and orange/white striped respectively.
light blue - blinker ckt pos
green - ground
light blue w/white stripe - running light ckt pos
same with left side, except the blue is orange and orange/white striped respectively.