GL1800 speaker replacement


Step-by-step tutorials on how to maintain and fix your GL1800
Post Reply
daemon
Posts: 3
Joined: Sun Nov 01, 2015 11:36 am
Location: Greeley,Co
Motorcycle: 2005 GL1800

GL1800 speaker replacement

Post by daemon »



Anyone have fair advice or links to the procedure to replacing front and rear speakers on my 2005 ?
Local installer quoted me 300$ just for installation.
Only links(YouTube) I have seen do not appear to involve the 1800.
Perhaps someone can help me save a buck or two.
Thanks in advance.
. Mayo



User avatar
thrasherg
Posts: 2123
Joined: Tue Oct 20, 2009 11:21 am
Location: Plano, TX
Motorcycle: 2017 Yamaha FZ07, 2015 Yamaha Super Tenere ES, 2005 Honda Shadow 750, CRF450X, CRF230, CRF250X, XR200, CR500, Gas Gas TXT200

Re: GL1800 speaker replacement

Post by thrasherg »

I have not replaced the speakers yet, but I know most people recommend the Polk Audio DB501 (Marine grade speakers) as they fit i n with no modification and you can find them on ebay for about $165 for four speakers (I think the 2005 wing uses these speakers for front and rear).

The front are really easy to change, you need to remove the front fascia, that is done by popping out the plastic speaker grills, then removing the allen bolt at the bottom of the trim, under the left & right speakers, and remove the plastic black clips up near the top of the speaker. once the 2 bolts and 2 clips are removed, the trim can be pulled backwards (away from the speedo & rev counter) and it will come out part way. There is a plug that needs to be disconnected underneath the trip, contains the wires that drive the LCD display, then the entire fascia can be moved away. This gives complete access to the front speakers, which are held in place by 4 screws. Undo the screws, unplug the wires going to the speakers, plug the new speakers onto the wires and fit them in place of the old speakers using the 4 screws, and replace the fascia.. Done (should take about an hour). I have not tried to get access to the rear speakers so hopefully someone can advise on that, but I doubt its very difficult!! If nothing else I have saved you $150 by installing the front speakers by yourself!! :D If you have the goldwing service manual, it clearly explains how to remove the fascia to gain access to the front speakers.

Gary

daemon
Posts: 3
Joined: Sun Nov 01, 2015 11:36 am
Location: Greeley,Co
Motorcycle: 2005 GL1800

Re: GL1800 speaker replacement

Post by daemon »

Thank you for your advice.
Hopefully it goes as easy as you describe.
Time to shop

User avatar
thrasherg
Posts: 2123
Joined: Tue Oct 20, 2009 11:21 am
Location: Plano, TX
Motorcycle: 2017 Yamaha FZ07, 2015 Yamaha Super Tenere ES, 2005 Honda Shadow 750, CRF450X, CRF230, CRF250X, XR200, CR500, Gas Gas TXT200

Re: GL1800 speaker replacement

Post by thrasherg »

daemon wrote:Thank you for your advice.
Hopefully it goes as easy as you describe.
Time to shop
If you are in the Texas, Dallas area (quite a ride for you) any time, I will be happy to help you do it!! :D

Gary

User avatar
oilboy1162
Posts: 133
Joined: Sat Mar 02, 2013 12:37 am
Location: Nashua,New Hampshire
Motorcycle: '72 cb750k
500 interceptor (fun!)
600 hurricane(funner!)
'82 gs850g
93 gl1500se(trade,sigh)
2013 gl1800(yeah baby!)

Re: GL1800 speaker replacement

Post by oilboy1162 »

2012 and newer use the db651s for the fronts. both front and rear need minor trimming but the sound improvement is well worth it.
:lol: I know people say we spend too much money on our rides, but I can't hear them when I'm 1000 miles away! :roll:

User avatar
NKYWinger
Posts: 349
Joined: Sun Oct 02, 2011 6:37 pm
Location: Covington, KY
Motorcycle: 1983 GL1100A Aspencade (sold)
2003 GL1800
2006 GL1800 Motor Trike w/2008 Lees-ure Lite

Re: GL1800 speaker replacement

Post by NKYWinger »

oilboy1162 wrote:
Tue May 09, 2017 8:03 pm
2012 and newer use the db651s for the fronts. both front and rear need minor trimming but the sound improvement is well worth it.
Actually, the redesign starting with 2006 requires dB651's in the front....dB501's still fit the rear
--John--

FTCS(SS) USN Ret.
'06 GL1800 Motor Trike
'83 GL1100 Aspy (SOLD)
'03 GL1800
'08 Lees-ure Lite
GWRRA 339547 KY - 'G'
DS# 1547

User avatar
dmcquade
Posts: 3
Joined: Thu Jun 06, 2019 9:02 am
Location: Perth Andover
Motorcycle: 2010 Goldwing GL1800 8a Airbag
1984 CB650SC Nighthawk

Re: GL1800 speaker replacement

Post by dmcquade »

Well just got a 2010 GL18BM (with airbag) in Metallic Titanium, and I love it. Just got last week, second hand, with 50k miles and it looks like new.

Anyway Ive already decided to start with some upgrades, which includes new speakers. Ive read all the write ups and decided to go with the Polk speakers. Unfortunately the DB651 and DB501's have been discontinued, are hard to find, and sellers want too much $$. So I looked through Polk Audio page and it appears that the DB652 and the DB522 are the replacements. I went ahead and purchased these from Amazon for a fantastic price. DB652 pair for $57.40 and DB522 pair for $57.39.

https://www.amazon.com/Polk-DB652-Ultra ... way&sr=8-1

https://www.amazon.com/Polk-Audio-DB522 ... B01EZWFNKA#

I'll let you all know how I make out when they arrive and install them.

Also purchased an MP3/AUX player that is supposed to attach to the CD changer on the bike, we will also see how that works.

https://www.ebay.ca/itm/USB-Sd-SDHC-Mp3 ... 2749.l2649

rathrbcruisin
Posts: 4
Joined: Wed May 23, 2018 4:26 pm
Location: adrian, mi
Motorcycle: 2003 GL1800A

Re: GL1800 speaker replacement

Post by rathrbcruisin »

So I guess these did not work? I'm looking for new speakers for my 2003 1800. Trying to find information on the Polk db522

User avatar
dmcquade
Posts: 3
Joined: Thu Jun 06, 2019 9:02 am
Location: Perth Andover
Motorcycle: 2010 Goldwing GL1800 8a Airbag
1984 CB650SC Nighthawk

Re: GL1800 speaker replacement

Post by dmcquade »

Sorry don't know how to post pictures. I ended up going with the Polk audio Marine Speakers DB522 - 5.25" front and the DB402 - 4" for the rear. They required minimal modifications, but no cutting of the bike. Only problem is wife says they are too loud; Sound great from where i'm sitting :D See facebook page I'm going to post my upgrades on for pictures. https://www.facebook.com/media/set/?set ... 091&type=3

User avatar
C-dub
Posts: 497
Joined: Thu Aug 24, 2017 8:29 pm
Location: DFW, Texas
Motorcycle: 2016 Goldwing Audio/Comfort/Nav ABS
Previous bikes:
2005 Hayabusa
1999 Suzuki Bandit 1200S
1979 Suzuki GS850G
1983 Suzuki GS1100E
1981 Honda XL250
1975 Suzuki GT185M
1970 Suzuki TC90 dirtbike

Re: GL1800 speaker replacement

Post by C-dub »

dmcquade wrote:
Sat Apr 18, 2020 9:36 am
Sorry don't know how to post pictures. I ended up going with the Polk audio Marine Speakers DB522 - 5.25" front and the DB402 - 4" for the rear. They required minimal modifications, but no cutting of the bike. Only problem is wife says they are too loud; Sound great from where i'm sitting :D See facebook page I'm going to post my upgrades on for pictures. https://www.facebook.com/media/set/?set ... 091&type=3
Too loud? I don't understand! :mrgreen:

I'm not to the point of wanting, I mean needing, to upgrade my speakers yet. Just about the only time I listen to them is when I'm by myself and once I found that auto speed volume setting they are okay most of the time. My wife doesn't like listening to music out of the speakers on the highway. She prefers the "quiet" and just enjoying the ride and scenery. When we are together I usually end up listening to the radio or whatever through my headset. She does, however, like a good riding tune when we're off the highway and in town. For that, the OEM speakers are good enough for now. Maybe I'll sneak some new ones in sometime. "What do you mean they sound different?" They sound the same to me. ;)

BTW, where did you get yours from? I'm seeing them on amazon for $60 & $70, I think for a pair each. Does that sound about right?

How much and what type of modification are we talking about?

EDIT: I saw the mods from your page. Good job, BTW. When you say the magnet wouldn't fit because it was too big, to you mean just diameter and or depth too?
I am not and have never been a LEO. My avatar is in honor of my friend, Dallas Police Sargent Michael Smith, who was murdered along with four other officers in Dallas on 7.7.2016.

User avatar
dmcquade
Posts: 3
Joined: Thu Jun 06, 2019 9:02 am
Location: Perth Andover
Motorcycle: 2010 Goldwing GL1800 8a Airbag
1984 CB650SC Nighthawk

Re: GL1800 speaker replacement

Post by dmcquade »

The larger speakers wouldnt fit because of the magnet depth I believe, and I didnt want to hack plastic out to get them to work.

For mods I wanted no change to the bike, and I only had to modify the speaker tabs as seen in the pictures as the holes in the speakers didnt lineup with the holes in the bike. For the rear speakers, I had to make the spacer to add to the outer diameter of the smaller speaker I installed. I got mine from amazon as well for about $60 a set.

We have since got some headsets that plug into the bike, which are great for talking and listening to music, so they get used more now.

The mp3 player was a nice add on too, which can be selected by selecting the cd on the control panel, and the tracks/cd and volume all controlled from the left handlebar controls.



Post Reply