dyna bead easy install


Technical information and Q&A applicable to all years and models of Goldwings
  • Sponsored Links
Post Reply
browntuna5647
Posts: 8
Joined: Sun Aug 16, 2015 10:24 am
Location: Rayland,Ohio
Motorcycle: "1982 GL1100A Aspencade"

dyna bead easy install

Post by browntuna5647 » Mon Jul 02, 2018 3:52 pm



I used the dyna beads in both of my tires and trying to put those beads in the valve stem was a little challenging at first because if you try to gently pour them in, they just clog right at the valve stem. I remembered what the guy told me when I bought them, he said they use a drill for vibration. So I had great success with a clear tube of plastic that fit over the bottle and fit over the valve stem, about 5 or 6 inches long. Hold the plastic hose at a very, very, slight angle, almost horizontal and used my Dremel tool up against the bottle. They literally just danced right out of the bottle and never once stop flowing without ever clogging once. Worked very well.



FM-USA
Posts: 2711
Joined: Wed May 18, 2011 8:40 am
Location: here, there
Motorcycle: mc

Re: dyna bead easy install

Post by FM-USA » Mon Aug 13, 2018 7:24 pm

Word to DIY'fers on Ceramic Beads.
The large bag of low cost beads are random in size. ONLY the smallest of bead will make the 90 degree turn in the stems.
Small pain separating out the little ones. I don't have a screen to screen out the larger beads so needle nose pliers AND PATIENCE :shock: is time consuming. ;)

.

.

.
"Tact is the ability to tell someone to go to hell in such a way that they look forward to the trip." W.C.

User avatar
BlueThunder
Posts: 113
Joined: Sat Dec 05, 2009 3:27 pm
Location: Long Island, NY
Motorcycle: 2014 CTX1300 Deluxe (BlackThunder aka Predator)
1977 GL1000 (Ox)
1980 CB750F (BlueThunder)
Contact:

Re: dyna bead easy install

Post by BlueThunder » Wed Aug 15, 2018 11:22 am

Use an air compressor with a rubber press-on tip to push the beads into the tire.
1. Remove Schrader valve from stem.
2. Using the clear tube that comes with the beads, pour as many beads as you can.
3. Attach the air tip into the clear tube. Give it a short blast. The beads will all go into the tire.
4. Repeat steps 2-3 times as needed.
_____
Brian

2014 Honda CTX1300 (BlackThunder aka Predator)
1977 Honda GL1000 (Ox)
1980 Honda CB750F (BlueThunder)
1982 Honda CB900F (RedThunder)

Post Reply