dyna bead easy install


Technical information and Q&A applicable to all years and models of Goldwings
  • Sponsored Links
Post Reply
browntuna5647
Posts: 8
Joined: Sun Aug 16, 2015 10:24 am
Location: Rayland,Ohio
Motorcycle: "1982 GL1100A Aspencade"

dyna bead easy install

Post by browntuna5647 » Mon Jul 02, 2018 3:52 pm



I used the dyna beads in both of my tires and trying to put those beads in the valve stem was a little challenging at first because if you try to gently pour them in, they just clog right at the valve stem. I remembered what the guy told me when I bought them, he said they use a drill for vibration. So I had great success with a clear tube of plastic that fit over the bottle and fit over the valve stem, about 5 or 6 inches long. Hold the plastic hose at a very, very, slight angle, almost horizontal and used my Dremel tool up against the bottle. They literally just danced right out of the bottle and never once stop flowing without ever clogging once. Worked very well.



FM-USA
Posts: 2750
Joined: Wed May 18, 2011 8:40 am
Location: here, there
Motorcycle: mc

Re: dyna bead easy install

Post by FM-USA » Mon Aug 13, 2018 7:24 pm

Word to DIY'fers on Ceramic Beads.
The large bag of low cost beads are random in size. ONLY the smallest of bead will make the 90 degree turn in the stems.
Small pain separating out the little ones. I don't have a screen to screen out the larger beads so needle nose pliers AND PATIENCE :shock: is time consuming. ;)

.

.

.
I'm hounded for posting helpful solutions? ARGO!!! (2012 film)
"May you have a quick & safe trip into oblivion"

User avatar
BlueThunder
Posts: 144
Joined: Sat Dec 05, 2009 3:27 pm
Location: Long Island, NY
Motorcycle: 2014 CTX1300 Deluxe (BlackThunder aka Predator)
1977 GL1000 (Ox)
Contact:

Re: dyna bead easy install

Post by BlueThunder » Wed Aug 15, 2018 11:22 am

Use an air compressor with a rubber press-on tip to push the beads into the tire.
1. Remove Schrader valve from stem.
2. Using the clear tube that comes with the beads, pour as many beads as you can.
3. Attach the air tip into the clear tube. Give it a short blast. The beads will all go into the tire.
4. Repeat steps 2-3 times as needed.
_____
Brian

2014 Honda CTX1300 (BlackThunder aka Predator)
1977 Honda GL1000 (Ox)

Wink1018
Posts: 11
Joined: Sat Jul 28, 2018 7:06 pm
Location: Muncy, PA
Motorcycle: 1986 GL1200I Interstate

Re: dyna bead easy install

Post by Wink1018 » Wed Aug 15, 2018 8:39 pm

Don’t laugh....

But, I use an electric etching ( vibrapeen) tool to shake the valve stem during dynabead install.
Matt

1986 Honda GL1200I Goldwing Interstate
1981 Yamaha XJ650 Maxim
1993 Suzuki VS1400GLP Intruder
2001 SVX650 V-Star Custom

Elrod
Posts: 4
Joined: Tue Nov 03, 2009 10:06 pm
Location: Travelers Rest, SC
Motorcycle: 2008 GL1800HPNA

Re: dyna bead easy install

Post by Elrod » Sat Sep 01, 2018 7:14 pm

I understand there are circumstances to add beads when the tire is already mounted on the rim. However, the easiest way I found to add beads was to simply toss the plastic bag of beads into the tire as it is being mounted on the rim. The plastic bag completely disintegrates quickly once the tire is being used and the beads are free to do their work.

Magic23
Posts: 24
Joined: Sat May 27, 2017 12:27 pm
Location: Ontario, Canada
Motorcycle: 2003 Goldwing GL1800
2005 Harley Davidson Road King Classic

Re: dyna bead easy install

Post by Magic23 » Wed Sep 05, 2018 8:13 pm

My bike mechanic does the same. He puts the pouch of beads inside the tire at the time of installation and the bag disintegrates and Bob's your uncle.
I swear by balancing beads.
Tom

pappyam
Posts: 17
Joined: Sun Apr 25, 2010 1:09 pm
Location: Montreal, Canada
Motorcycle: 2006 GL1800

Re: dyna bead easy install

Post by pappyam » Tue Sep 11, 2018 6:00 am

I get my beads from a friend who buys them in bulk for his trucks. After I have weighed the correct amount, I wrap them in saran wrap. Once the first tire bead is mounted, I open up the plastic wrap and let them flow into the tire then finish mounting the tire. Have not lost any beads yet. I guess I could also throw it in with the bag.
Don



Post Reply