1976 GL100 Second time around.


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
Post Reply
User avatar
insanemoondoggie
Posts: 37
Joined: Fri Aug 14, 2015 11:50 pm
Location: N.W. Missouri
Motorcycle: 1976 gl1000
1996 GL1500A Aspencade.
2001 Vulcan Nomad 1500
1985 Honda Shadow 700
1964 VNB Vespa 125
Contact:

1976 GL100 Second time around.

Post by insanemoondoggie » Tue Jul 03, 2018 8:47 am



In the late 90's I bought 1976 GL1000 basket-case off Craigslist for $600 and spent the winter putting the bikr back to riding condition. {see red pic} Rode the bike for a year, then bought a new Vulcan Nomad in 2001 and gave the Wing to a relative who wanted to start riding but sold the bike instead and I pretty much figured the bike was gone for good.
In 2015 I found the bike stripped down in basement with some of the parts still with the bike, the owner gave me the bike for removing from the basement. When he handed me the title, it was still in my name and had never been transferred 15 years later!
So far I have completely rebuilt the front and rear brakes, and front triple bearings and front suspension, carb's rebuilt to Randakk's spec's, Dynatec coils, timing belts, spark plugs, coolant hose's,thermostat, radiator cap,front wheel, new tubes and tires. Whew! and several things I have forgotten. lol
I'm building my own exhaust using 2 of the smallest glass pacs mufflers Walker makes and a 7 ft piecs of 1 3/4 exhaust pipe, time to drag the Mig out. Also bought a set of vintage AMCO saddlebags, complete with rear trunk and sissy-bar and Shadow Royal fairing, all in excellent condition. Right now my goal is to completely assemble {still looking for little stuff} the bike and have everything in working condition, then strip the bike down to do final paint and detailing, fit and finish.
I happy this old Wing showed back up in my life and excited about riding her again.She is Home to stay for good this time.
Attachments

second time home
second time home




Tear down
Tear down


front end
front end


First rebuild
First rebuild


A little clean up goes along way.
A little clean up goes along way.


Getting closer .
Getting closer .


Time to mock up the exhaust.
Time to mock up the exhaust.




DaveO430
Posts: 775
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: 1976 GL100 Second time around.

Post by DaveO430 » Tue Jul 03, 2018 9:18 am

What are the chances of that happening?

User avatar
badandy
Posts: 78
Joined: Tue Nov 01, 2016 7:03 pm
Location: Weirton, West Virginia
Motorcycle: 1977 GL1000 Goldwing
1982 GL500I
1983 VT500 Shadow

Re: 1976 GL100 Second time around.

Post by badandy » Wed Jul 04, 2018 4:56 am

It was your destiny.

User avatar
Fred Camper
Posts: 1302
Joined: Sun Aug 16, 2009 9:15 pm
Location: Metro Detroit, MI
Motorcycle: 1977 GL1000, 1976 LTD GL1000

Re: 1976 GL100 Second time around.

Post by Fred Camper » Thu Jul 05, 2018 3:07 pm

Another great bike saved from becoming scrap metal (and plastic). These are special bikes.

User avatar
insanemoondoggie
Posts: 37
Joined: Fri Aug 14, 2015 11:50 pm
Location: N.W. Missouri
Motorcycle: 1976 gl1000
1996 GL1500A Aspencade.
2001 Vulcan Nomad 1500
1985 Honda Shadow 700
1964 VNB Vespa 125
Contact:

Re: 1976 GL100 Second time around.

Post by insanemoondoggie » Fri Jul 06, 2018 11:46 am

Thx for the replies :D . I got the mufflers weld up and patched a few small spots on the headers, they should last a little while, but going to need replaced down the road.
I used electrolysis to clean the tank, which done a nice job but needs to be coated, going to do a POR-15 job on it, which is my next project. I needed to do a little better clean up around the rear wheel area any way.
Thought about trying these rear shocks, Proggressive are $260 and these are $85 , anyone have any experience with these shocks? https://www.saber-cycle.com/store/product110.html#110

User avatar
SnoBrdr
Posts: 589
Joined: Fri Mar 07, 2014 9:01 am
Location: Providence, Rhode Island
Motorcycle: 1978 GL 1000

129K Original Owner

Re: 1976 GL100 Second time around.

Post by SnoBrdr » Fri Jul 06, 2018 12:00 pm

insanemoondoggie wrote:
Fri Jul 06, 2018 11:46 am
Thx for the replies :D . I got the mufflers weld up and patched a few small spots on the headers, they should last a little while, but going to need replaced down the road.
I used electrolysis to clean the tank, which done a nice job but needs to be coated, going to do a POR-15 job on it, which is my next project. I needed to do a little better clean up around the rear wheel area any way.
Thought about trying these rear shocks, Proggressive are $260 and these are $85 , anyone have any experience with these shocks? https://www.saber-cycle.com/store/product110.html#110
Don't know anything about those but have been warned by many people not to do business with Saber.

User avatar
WingAdmin
Site Admin
Posts: 19207
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 1976 GL100 Second time around.

Post by WingAdmin » Fri Jul 06, 2018 3:53 pm

insanemoondoggie wrote:
Fri Jul 06, 2018 11:46 am
Thx for the replies :D . I got the mufflers weld up and patched a few small spots on the headers, they should last a little while, but going to need replaced down the road.
I used electrolysis to clean the tank, which done a nice job but needs to be coated, going to do a POR-15 job on it, which is my next project. I needed to do a little better clean up around the rear wheel area any way.
Thought about trying these rear shocks, Proggressive are $260 and these are $85 , anyone have any experience with these shocks? https://www.saber-cycle.com/store/product110.html#110
That's Saber Cycle. They have bottom-of-the-barrel crap made cheaply in Chinese factories, and sell it as no-name replacements for your bike, or as their own "Barracuda" brand. You get what you pay for, so start saving up to replace them now, because they won't last long. :)

Or...just spend some time reading what other people have to say, then make your own choice: /Vendors/Saber-Cycle_880

User avatar
insanemoondoggie
Posts: 37
Joined: Fri Aug 14, 2015 11:50 pm
Location: N.W. Missouri
Motorcycle: 1976 gl1000
1996 GL1500A Aspencade.
2001 Vulcan Nomad 1500
1985 Honda Shadow 700
1964 VNB Vespa 125
Contact:

Re: 1976 GL100 Second time around.

Post by insanemoondoggie » Fri Jul 06, 2018 6:13 pm

Now that you mention it, I had heard of a iffy parts site a few years ago, could not remember their name. Thanks for the heads up, had a pretty good size order going to them, sounded to good to be true. Looks like she's going to get progressive shocks rear and springs front, whats another $400, right? lol!
Pulled the tank and have it airing out, well do the POR-15 tomorrow, has to set 96 hours before fuel can be added. Going to just paint the exhaust with black header paint. Will post more pick in a few days.

User avatar
DWade1990
Posts: 60
Joined: Thu Apr 27, 2017 7:27 pm
Location: Akron, OH
Motorcycle: 1976 GL1000
1983 GL1100 Aspencade
1981 CB750K

Re: 1976 GL100 Second time around.

Post by DWade1990 » Fri Jul 06, 2018 8:43 pm

What a cool story! I love seeing these old bikes put back to their former glory instead of getting scrapped or cut up into some cafe racer garbage. Good luck with your project and keep the pictures coming!

Goldwing7777
Posts: 11
Joined: Sat Jul 07, 2018 7:09 am
Location: United Kingdom
Motorcycle: 1976 GL1000 K1

Re: 1976 GL100 Second time around.

Post by Goldwing7777 » Tue Jul 10, 2018 4:26 am

Only 2 good things [so far] with my project bike in boxes is that I found :-

It came with a K&N air filter (but the airbox is missing !) ...
also found a pair of perfect Koni rear shocks.

User avatar
insanemoondoggie
Posts: 37
Joined: Fri Aug 14, 2015 11:50 pm
Location: N.W. Missouri
Motorcycle: 1976 gl1000
1996 GL1500A Aspencade.
2001 Vulcan Nomad 1500
1985 Honda Shadow 700
1964 VNB Vespa 125
Contact:

Re: 1976 GL100 Second time around.

Post by insanemoondoggie » Tue Jul 10, 2018 7:04 am

Goldwing7777 wrote:
Tue Jul 10, 2018 4:26 am
Only 2 good things [so far] with my project bike in boxes is that I found :-

It came with a K&N air filter (but the airbox is missing !) ...
also found a pair of perfect Koni rear shocks.
The shocks will save you $270.00, so far that's the cheapest I could find a set of Progressive 412's. As for the airbox and other stuff you need, here's what worked for me. I installed a big grease board in the shop and keep a list of all the parts needed as they pop up, then when I head for a salvage yard, take a picture with my cell phone so the list is always with me. This is an awesome resource, saved me $$$ viewtopic.php?f=19&t=6742

User avatar
insanemoondoggie
Posts: 37
Joined: Fri Aug 14, 2015 11:50 pm
Location: N.W. Missouri
Motorcycle: 1976 gl1000
1996 GL1500A Aspencade.
2001 Vulcan Nomad 1500
1985 Honda Shadow 700
1964 VNB Vespa 125
Contact:

Re: 1976 GL100 Second time around.

Post by insanemoondoggie » Tue Jul 10, 2018 10:26 am

Got the tank done, cleaned it up inside and out. Used POR-15, motorcycle tank recondition kit for the first time and it worked nicely. Clean the rust off the outside, gave it a coat of primer and 3 coats of gloss black engine color. Has to set till Friday before any fuel can be added.
Attachments

Rusty around sender
Rusty around sender


before treatment
before treatment






Tank pulled
Tank pulled


Added de-greaser
Added de-greaser


Top cut out of plastic yogurt  container top to seal fuel sender opening.
Top cut out of plastic yogurt container top to seal fuel sender opening.


Metal prep, roll it around good for and hour or better
Metal prep, roll it around good for and hour or better


In the acorn paint booth
In the acorn paint booth




User avatar
SnoBrdr
Posts: 589
Joined: Fri Mar 07, 2014 9:01 am
Location: Providence, Rhode Island
Motorcycle: 1978 GL 1000

129K Original Owner

Re: 1976 GL100 Second time around.

Post by SnoBrdr » Tue Jul 10, 2018 10:33 am

insanemoondoggie wrote:
Tue Jul 10, 2018 10:26 am
Got the tank done, cleaned it up inside and out. Used POR-15, motorcycle tank recondition kit for the first time and it worked nicely. Clean the rust off the outside, gave it a coat of primer and 3 coats of gloss black engine color. Has to set till Friday before any fuel can be added.
POR is great stuff and very easy to use,

User avatar
insanemoondoggie
Posts: 37
Joined: Fri Aug 14, 2015 11:50 pm
Location: N.W. Missouri
Motorcycle: 1976 gl1000
1996 GL1500A Aspencade.
2001 Vulcan Nomad 1500
1985 Honda Shadow 700
1964 VNB Vespa 125
Contact:

Re: 1976 GL100 Second time around.

Post by insanemoondoggie » Tue Jul 10, 2018 10:50 pm

SnoBrdr wrote:
Tue Jul 10, 2018 10:33 am
insanemoondoggie wrote:
Tue Jul 10, 2018 10:26 am
Got the tank done, cleaned it up inside and out. Used POR-15, motorcycle tank recondition kit for the first time and it worked nicely. Clean the rust off the outside, gave it a coat of primer and 3 coats of gloss black engine color. Has to set till Friday before any fuel can be added.
POR is great stuff and very easy to use,
I had used Cream once before with poor results, but the POR worked really well and your right , it was an easy application, hardest parts was pulling the tank.

User avatar
insanemoondoggie
Posts: 37
Joined: Fri Aug 14, 2015 11:50 pm
Location: N.W. Missouri
Motorcycle: 1976 gl1000
1996 GL1500A Aspencade.
2001 Vulcan Nomad 1500
1985 Honda Shadow 700
1964 VNB Vespa 125
Contact:

Re: 1976 GL100 Second time around.

Post by insanemoondoggie » Sat Jul 14, 2018 11:09 am

Fuel tank is done and reinstalled, painted the battery box and installed new progressive shocks rear {tx wingadmin for talking me out of the cheapo's} Dynatech module showed up,so may fire it off this weekend. :D
Attachments

Tank installed
Tank installed


Tank installed and rear assembly back together
Tank installed and rear assembly back together


Dynatech ignition module showed up.
Dynatech ignition module showed up.




Post Reply