GL1200,Aspencade 1984.The right jets and the needle height??


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Post Reply
gervais
Posts: 247
Joined: Tue Oct 24, 2017 6:49 am
Location: riviere-bleue,quebec,canda
Motorcycle: GoldWing 1984 GL1200A Aspencade

GL1200,Aspencade 1984.The right jets and the needle height??

Post by gervais » Tue Jul 03, 2018 9:07 pm



hi all
well my engine is running fine bt when riding i can smell the odor of combustion.
my engine is running too rich.

the idle jet is an #35 and the engine is running idle like a clock.

the high speed jet that i have is #108.

i am beginning to suspect maybe carburators center needle that could be too high in height!!!!


anybody have a picture of the level of those needle,
there is a small washer too,

the acceleration is good,90 kmh and 2600 rpm i think but not sure right now.

this engine has not run for 3 years

thanks for your info

gervais



Post Reply