86 Aspey pulse generator


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Post Reply
TimWoodward
Posts: 6
Joined: Sat Jun 04, 2016 4:59 pm
Location: Naples, Fl
Motorcycle: 1986 Aspencade SEI

86 Aspey pulse generator

Post by TimWoodward » Sun Jul 08, 2018 6:02 pm



My 86 Aspey has a intermittent issue where it dies after a mile or two sets the fuel system light and sets the crankshaft sensor code. One solid and two flashing LED's. It will fire up after it sit's for a while. Have you all seen this issue before? Can this sensor cause a intermittent problem?
Thanks, Tim



User avatar
Ohara
Posts: 73
Joined: Mon Nov 16, 2015 9:05 am
Location: Ontario Canada
Motorcycle: 1986 Interstate
1986 Aspencade

Re: 86 Aspey pulse generator

Post by Ohara » Mon Jul 09, 2018 6:04 am

Yes the pulse generator can do this. You can check the resistance of the generator before you start the bike. When the bike dies check the resistance again, if no resistance the pulse generator is bad. There are a few things that can cause this also. Good luck.

Post Reply