gl1800 not starting no spark


Information and questions on GL1800 Goldwings (2001-2017)
  • Sponsored Links
Post Reply
icwingman
Posts: 5
Joined: Thu Jun 21, 2018 12:23 pm
Location: spring hill, fl
Motorcycle: 2004 gl1800

gl1800 not starting no spark

Post by icwingman » Wed Aug 01, 2018 9:04 pm



Rats ate up my wiring living in front under aie vents, some wire are eaten others have insulation stripped back, it there hope of me rewiring this project, all plastic is off bike. can i resolder heat shrink wrap and start this project. the main lower harness has the most problems. Can u buy a new harness and where from, approx cost if known. can this be done without dropping the motor, thanks



User avatar
keithg64
Posts: 513
Joined: Thu May 21, 2009 9:47 pm
Location: Geneseo, IL
Motorcycle: 2007 Gl1800HPNA Blue
2000 GL1500 Pearl Coranado Blue -sold

Re: gl1800 not starting no spark

Post by keithg64 » Mon Aug 06, 2018 12:09 pm

If you have not completed this job yet. Yes you can solder and heat shrink. A new wire harness could be next to impossible.
It's not what you buy, it's what you build.

DaveO430
Posts: 872
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: gl1800 not starting no spark

Post by DaveO430 » Mon Aug 06, 2018 3:41 pm

A new harness is over $1200, I could do a lot of fixing for that.

icwingman
Posts: 5
Joined: Thu Jun 21, 2018 12:23 pm
Location: spring hill, fl
Motorcycle: 2004 gl1800

Re: gl1800 not starting no spark

Post by icwingman » Mon Aug 06, 2018 7:22 pm

im in fl so waiting for a few cool nights to start this project. will probably resolder and shrink wrap , hope for the best.



Post Reply