bottom end motor noise


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Post Reply
User avatar
filupsd
Posts: 84
Joined: Fri Sep 07, 2012 1:07 pm
Location: Rolla, Missouri
Motorcycle: 1984 GL 1200 Standard

bottom end motor noise

Post by filupsd » Wed Aug 08, 2018 12:59 pm



How do I know if the noise in the bottom end of my 84 GL1200 is transmission or something else. I am getting harder shifts and can not shift into neutral while the motor is running. I was originally thinking Clutch but as I was talking to an older mechanic, he said it sounded like the transmission to him. Any way to know without dropping the engine.

By the way this has all happened since I changed to Delo 15W-40, And yes it is the JASC etc stuff. I am planning to drop the oil and put some Mobil 1 in and see if there is any difference.



User avatar
paneled
Posts: 61
Joined: Thu Sep 17, 2015 8:33 am
Location: kansas city mo
Motorcycle: 1986 Goldwing 1200 aspencade sei

Re: bottom end motor noise

Post by paneled » Thu Aug 09, 2018 12:48 pm

the trans is inside the case haves situated below the crankshaft,
you have to split the case to get to the trans, the clutch is at the
right rear of the engine and can be changed with the engine in the
bike, mine is an 86 1200 sei and I installed a new clutch in my bike
the hardest part was getting all the old gasket off the case.
86 aspy sei
54 chevy panel truck
68 chevy van
69 chevy van
64 chevy van

User avatar
CrystalPistol
Posts: 473
Joined: Wed Mar 10, 2010 9:07 pm
Location: Shenandoah Valley of Virginia
Motorcycle: 1985 GL1200A
1997 GL1500SE Lehman Trike

Re: bottom end motor noise

Post by CrystalPistol » Thu Aug 09, 2018 2:30 pm

I would bleed the clutch hydraulic line … might help with shifting by getting full travel of pushrod. Won't do much for them noises though.

What noises you hear anyway? Loosely adjusted timing belts will flap or flop at low speeds. Rockers will also make noises at low speeds when hot if rubbing the shaft collars, was a bulletin on that years ago, noise is heard from under rocker / cam cover area.

PS .… my 1200 LOVES the Dello 15W40.
Image

Post Reply