I recently purchased a 1982 Honda goldwing GL1100 from a friend who had just got it in a trade blah blah. It runs great.42xxx on the odometer. I took all the chrome off (crash bars n tow plate all of it). Fairing is gone. Bags all gone. Now the seat has to go but I was wondering if there was any way to find a seat that would fit the 82 gl1100 that had a much smaller profile. 1 seat maybe enough for a 2nd. Thanks for you inputtt
Tallboi
Naked 82 gl1100
-
- Sponsored Links
-
RBGERSON
- Posts: 3213
- Joined: Tue Mar 09, 2010 7:57 am
- Location: SCOTTSDALE, AZ
- Motorcycle: 98 SE GL 1500
had every year from 75 to 83
Re: Naked 82 gl1100
All custom stuff I have never seen a manufacture's retro for a 10000's or 1100's single seat mod. Check the custom forum over at NGW..
HAD LOTS OF GOLDWING 75-83
NOW INTO 1500'S..RIDING A 1998 SE
FAIR WINDS,
RB
NOW INTO 1500'S..RIDING A 1998 SE
FAIR WINDS,
RB
-
WingAdmin
- Site Admin
- Posts: 19875
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer
Re: Naked 82 gl1100
You might want to perhaps repaint the front crash bars (I know you don't want the chrome) and reinstall them, even if you just cut them down a bit. They're there really for a good reason. Otherwise a gentle tipover which would otherwise be a non-event with zero damage, instead turns into a valve-cover-punching, aluminum-head-damaging, expensive repair. The heads and valve covers were not designed to take the weight of the bike.