need a few parts for my newly aquired 82 gl1100i


Motorcycle related items for sale or wanted
  • Sponsored Links
Post Reply
quasi2008
Posts: 20
Joined: Fri Oct 05, 2018 12:18 pm
Location: morgantown wv
Motorcycle: 1982 GL1100I INTERSTATE

need a few parts for my newly aquired 82 gl1100i

Post by quasi2008 » Sun Oct 07, 2018 6:32 pm



on the hunt for a rear caliper w/bolts. a seat adjustment bolt. a rear master cylinder in rebuildable shape. tks



User avatar
Wilcoy02
Posts: 928
Joined: Sun Nov 21, 2010 11:37 pm
Location: Marengo, Ohio
Motorcycle: 1983 GL1100 I purchased 3/16

1983 GL1100I frame with an 80 engine. poor boy installed with C-5 ignition--DIED in Grande Prairie Alberta Canada 8/15


98 valkyrie sold 8/16

Re: need a few parts for my newly aquired 82 gl1100i

Post by Wilcoy02 » Mon Oct 08, 2018 11:56 am

The seat bolt-- I have not used mine in over 10 years. The seat is not going any where so I don't use the bolt.
Same with the 2 front bolts that hold the false tank on.

quasi2008
Posts: 20
Joined: Fri Oct 05, 2018 12:18 pm
Location: morgantown wv
Motorcycle: 1982 GL1100I INTERSTATE

Re: need a few parts for my newly aquired 82 gl1100i

Post by quasi2008 » Wed Oct 10, 2018 6:55 pm

found all I needed, tks

quasi2008
Posts: 20
Joined: Fri Oct 05, 2018 12:18 pm
Location: morgantown wv
Motorcycle: 1982 GL1100I INTERSTATE

Re: need a few parts for my newly aquired 82 gl1100i

Post by quasi2008 » Sun Oct 14, 2018 3:17 pm

got a caliper for the bike, needed the rear caliper. the one I have appears to be for the left front. mounts up ok. however the mounting bolt bushings and boots for the pivot bolt are gone. :(

User avatar
TerryRuth
Posts: 110
Joined: Tue Jun 21, 2011 1:51 am
Location: Edson,Alberta,Canada
Motorcycle: 1983 gl1100 aspecade
95se1500(selling)
06 navi/comfort

Re: need a few parts for my newly aquired 82 gl1100i

Post by TerryRuth » Tue Oct 16, 2018 11:41 am

well if the rear master cylinder is only 1/2 the job that a 95 1500 is I would NOT EVER replace it with ANYTHING but BRAND BRAND new It's not a job you want to do TWICE trust me ! ! !

User avatar
TerryRuth
Posts: 110
Joined: Tue Jun 21, 2011 1:51 am
Location: Edson,Alberta,Canada
Motorcycle: 1983 gl1100 aspecade
95se1500(selling)
06 navi/comfort

Re: need a few parts for my newly aquired 82 gl1100i

Post by TerryRuth » Tue Oct 16, 2018 11:47 am

and I junked 1 IDENTICAL in Edmonton it's at Vicious cycle had carb issues
new owers 82 1100 grey

quasi2008
Posts: 20
Joined: Fri Oct 05, 2018 12:18 pm
Location: morgantown wv
Motorcycle: 1982 GL1100I INTERSTATE

Re: need a few parts for my newly aquired 82 gl1100i

Post by quasi2008 » Tue Oct 16, 2018 2:55 pm

rear master cylinder came right apart after I put a little heat from a map torch to it. not to difficult to remove.



Post Reply