Rotor movement


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Post Reply
86GLPat
Posts: 2
Joined: Thu Oct 11, 2018 3:21 pm
Location: Vermont
Motorcycle: 1986 aspencade

Rotor movement

Post by 86GLPat » Thu Oct 11, 2018 3:27 pm



Well rebuilding myy front left caliper and going good until I grabbed the rotor and found I could move it up and down about 3/16 or 1/4 inch without moving the tire is this normal would appreciate any feedback



User avatar
WingAdmin
Site Admin
Posts: 19550
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Rotor movement

Post by WingAdmin » Fri Oct 12, 2018 10:37 am

86GLPat wrote:
Thu Oct 11, 2018 3:27 pm
Well rebuilding myy front left caliper and going good until I grabbed the rotor and found I could move it up and down about 3/16 or 1/4 inch without moving the tire is this normal would appreciate any feedback
Definitely not. The brake rotors should be solidly bolted to the wheel, and should not move at all. Can you see what part is loose?

86GLPat
Posts: 2
Joined: Thu Oct 11, 2018 3:21 pm
Location: Vermont
Motorcycle: 1986 aspencade

Re: Rotor movement

Post by 86GLPat » Fri Oct 12, 2018 12:56 pm

It's definitely just the rotor moving going to pull the wheel and see what it is thank you

Post Reply