Stuck Two Stroke Piston


Brothers and Sisters to our Goldwings - Other Bikes we Own
  • Sponsored Links
Post Reply
User avatar
Hoosier Jack
Posts: 419
Joined: Thu Oct 02, 2014 4:21 am
Location: Terre Haute, IN
Motorcycle: 1982 GL1100 Interstate

Stuck Two Stroke Piston

Post by Hoosier Jack » Sat Oct 27, 2018 5:45 pm



I picked up two 1991 Kawasaki KE100s today for my grandsons. They are in excellent condition and I got them for $200 total. One of the bikes have a piston that is stuck and I'm wondering how best to get it loosened up. I read about this in the past but never have had the problem before. Can't imagine it would be any different than a four stroke????





Nice huh?



User avatar
suvcw04
Posts: 211
Joined: Fri Apr 08, 2011 7:26 pm
Location: NE Iowa
Motorcycle: 2005 GL1800 Lehman Trike

Re: Stuck Two Stroke Piston

Post by suvcw04 » Sat Oct 27, 2018 6:46 pm

Pour some Marvel Mystery Oil in the cylinder and let it set for a few days. Pull the head and GENTLY tap on the piston with a light hammer using a chunk of wood as a "go between". This will only work as long as the piston is NOT at TDC or bottom of stroke.
Let us know how it turns out.
Don't drive intoxicated.
Don't drive intexticated.

User avatar
virgilmobile
Posts: 8843
Joined: Sun Sep 19, 2010 5:39 pm
Location: Denham Springs,La.
Motorcycle: 1988 GL1500 I
Previously owned
78 GL1000
81 GL1100
82 GL1100 I
83 GL1100 I
83 GL1100 standard
84 GL 1200 I

Re: Stuck Two Stroke Piston

Post by virgilmobile » Sat Oct 27, 2018 6:47 pm

I suppose the first thing i'd try is mix 50% atf and 50% acetone....remove the spark plugs and and pour in a shot glass full into the cylinder..put the plug back in loose..Let it set for a couple of days...Put the bike in top gear and to rock it back and forth...it may free up.

User avatar
OldguyGlen
Posts: 72
Joined: Sat Nov 24, 2018 10:55 am
Location: Mound,MN
Motorcycle: 1980 GL1100 STD/Vetters
1966 Honda 90

Re: Stuck Two Stroke Piston

Post by OldguyGlen » Tue Dec 11, 2018 5:40 pm

I know the feeling. Got a '66 Honda 90 for free in 1975. Wife didn't want the kids near it. I was a rider in my youth, but sold 'em all when I got married. Stuck this Honda 90 out back of the shed (outdoors). It sat there 40 years. Kids grown, and my wife died after a wonderful 51 yr marriage. I needed a winter project. Brought the Honda inside. Piston seized. Took the head off (overhead cam... very advanced for a '66). Couldn't split the case till I got the cylinder off, but piston stuck inside the cyl prevented its removal. Lots of penetrating PB Blaster, A little heat on the outside (not too much), and the hammer + block of wood. Piston was near TDC. Once the piston moved at all, it was just a matter of working it a bit more and it came out. Cylinder was usable, but new piston & rings were needed.

Before rehab.  1966 Honda 90
Before rehab. 1966 Honda 90


After rehab.  Fun town bike.
After rehab. Fun town bike.


User avatar
AZgl1800
Posts: 1670
Joined: Thu Oct 30, 2008 2:46 pm
Location: Lake Oologah Indian Territory USA
Motorcycle: '02 GL1800

Re: Stuck Two Stroke Piston

Post by AZgl1800 » Thu Dec 13, 2018 2:59 am

nice job.

the little bikes are a lot of fun, I sure enjoy my little 250cc Piaggio MP3


~John

Post Reply