Wiring - lost pics and I am stuck


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
Post Reply
frodeem
Posts: 41
Joined: Fri Oct 06, 2017 6:13 pm
Location: Chicago, IL
Motorcycle: 1982 Goldwing Aspencade

Wiring - lost pics and I am stuck

Post by frodeem » Mon Nov 05, 2018 12:36 pm



I have an '82 Aspy and I installed a Neon coil. I had to take the shelter off and disconnect a bunch of wires. I took pictures but I somehow managed to delete the pictures (I am an idiot). I am completely lost now. I have attached some pictures, I would really appreciate some help.














The only one I remember is #1 which connects to the air pump on the shelter. HELP!



DaveO430
Posts: 1030
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: Wiring - lost pics and I am stuck

Post by DaveO430 » Mon Nov 05, 2018 7:49 pm

#s 2,3&4 are added on, can't help.
#5 is an extra auxiliary light connection.
#6 is a ground for the turn signal flasher, not needed for a 2 pin flasher.
#7 is a ground wire for the fairing.

frodeem
Posts: 41
Joined: Fri Oct 06, 2017 6:13 pm
Location: Chicago, IL
Motorcycle: 1982 Goldwing Aspencade

Re: Wiring - lost pics and I am stuck

Post by frodeem » Tue Nov 06, 2018 4:03 pm

DaveO430 wrote:
Mon Nov 05, 2018 7:49 pm
#s 2,3&4 are added on, can't help.
#5 is an extra auxiliary light connection.
#6 is a ground for the turn signal flasher, not needed for a 2 pin flasher.
#7 is a ground wire for the fairing.
Thanks Dave, whats my best option here?

DaveO430
Posts: 1030
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: Wiring - lost pics and I am stuck

Post by DaveO430 » Tue Nov 06, 2018 4:04 pm

frodeem wrote:
Tue Nov 06, 2018 4:03 pm


Thanks Dave, whats my best option here?
Best option for what?

frodeem
Posts: 41
Joined: Fri Oct 06, 2017 6:13 pm
Location: Chicago, IL
Motorcycle: 1982 Goldwing Aspencade

Re: Wiring - lost pics and I am stuck

Post by frodeem » Tue Nov 06, 2018 4:06 pm

to reconnect them the right way.

User avatar
WingAdmin
Site Admin
Posts: 19637
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Wiring - lost pics and I am stuck

Post by WingAdmin » Tue Nov 06, 2018 4:12 pm

#1 is definitely the compressor motor power.

#2, 3, 4 and 5 are not aftermarket. They are the connectors that go to the compressor control panel:

Image

Just match the wire colors coming from that control panel, and you'll be OK with those.

User avatar
WingAdmin
Site Admin
Posts: 19637
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Wiring - lost pics and I am stuck

Post by WingAdmin » Tue Nov 06, 2018 4:14 pm

#6 is the optional ground used for if you have a three connector flasher installed, which requires a ground. If you have only a two connector flasher, it is left unconnected.

#7 is some aftermarket wire someone has stuck in there.

DaveO430
Posts: 1030
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: Wiring - lost pics and I am stuck

Post by DaveO430 » Wed Nov 07, 2018 9:54 am

WingAdmin wrote:
Tue Nov 06, 2018 4:12 pm
#1 is definitely the compressor motor power.

#2, 3, 4 and 5 are not aftermarket. They are the connectors that go to the compressor control panel:

[
Correct, I forgot it was an aspy with the compressor mounted under the top cover.



Post Reply