Reverse switch sticking


Information and questions on GL1800 Goldwings (2001-2017)
  • Sponsored Links
Post Reply
Goldwingknight
Posts: 5
Joined: Tue Oct 09, 2018 3:35 pm
Location: United Kingdom
Motorcycle: 2003 Honda GL1800 Goldwing Trike

Reverse switch sticking

Post by Goldwingknight » Mon Dec 03, 2018 2:29 am



I have a 2003 gl1800 and my reverse switch keeps sticking in. Has anyone else had this issue, if so how did you fix it? :D



User avatar
MikeB
Posts: 2289
Joined: Fri Dec 04, 2009 12:54 pm
Location: Tacoma, WA
Motorcycle: 1998 - GL1500 Aspencade.
2003 - GL1800A

Re: Reverse switch sticking

Post by MikeB » Mon Dec 03, 2018 5:21 am

This posting should help. Works for many of us.
viewtopic.php?f=14&t=9296&hilit=sticking
MikeB
Tacoma, WA, USA

User avatar
jackjohn
Posts: 19
Joined: Sat Jan 02, 2010 8:12 pm
Location: Richmond, TX
Motorcycle: 1974 CB450 Sold
1975 GL1000 Sold
1982 GL1100I
2004 GL1800A Sold
2012 GL1800

Re: Reverse switch sticking

Post by jackjohn » Mon Dec 03, 2018 12:22 pm

I have found the best way is to replace the switch pack. This is a few hundred dollars but you get all new switches. You can carefully take it apart and clean the dirty dried grease out of it with electronic cleaner, re-grease it with a light coat of lithium grease, just be very careful the little pieces don't go flying when you open it. I don't recommend WD40, it is for displacing water and will do a fair job polishing stainless steel, not for cleaning switches.

User avatar
baumedagn
Posts: 151
Joined: Sat Oct 03, 2009 4:38 am
Location: Lexington, SC
Motorcycle: 2012
GL1800HPNM

Re: Reverse switch sticking

Post by baumedagn » Wed Dec 05, 2018 6:02 pm

Try using CRC contact cleaner. Spray it in the switch and work it a little bit. If that doesn't do it, you may need to open it up and clean it. There are many posts on this type of problem throughout this forum.



Post Reply