Reverse not working


Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Post Reply
PiotrGL1500
Posts: 10
Joined: Sat Nov 17, 2018 1:13 pm
Location: Krakow, Poland
Motorcycle: GL 1500 1990
Contact:

Reverse not working

Post by PiotrGL1500 » Fri Dec 07, 2018 3:18 pm



Well, I'm doing all as it should be: engine on, neutral, reverse lever moved to back position, push starter and...nothing. Only what happens is that bike is blocked so can not be moved but revers is not working. Where to looking for??? Fuses are ok.



User avatar
WingAdmin
Site Admin
Posts: 19695
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Reverse not working

Post by WingAdmin » Fri Dec 07, 2018 3:54 pm

Is the reverse light coming on the dash when you shift to reverse?

PiotrGL1500
Posts: 10
Joined: Sat Nov 17, 2018 1:13 pm
Location: Krakow, Poland
Motorcycle: GL 1500 1990
Contact:

Re: Reverse not working

Post by PiotrGL1500 » Fri Dec 07, 2018 5:24 pm

Yes, "R" light is comming on.

User avatar
Erdeniz Umman
Posts: 740
Joined: Tue Oct 27, 2015 12:33 am
Location: Ankara Turkey
Motorcycle: 2000 GL1500SE

Re: Reverse not working

Post by Erdeniz Umman » Sat Dec 08, 2018 12:35 am

Can you hear the relay A (the main relay in front of the battery) clicks?

PiotrGL1500
Posts: 10
Joined: Sat Nov 17, 2018 1:13 pm
Location: Krakow, Poland
Motorcycle: GL 1500 1990
Contact:

Re: Reverse not working

Post by PiotrGL1500 » Sat Dec 08, 2018 4:33 am

Did not check, will be laer today and check. So far the only click I could hear was the micro switch next to the reverse handle.

PiotrGL1500
Posts: 10
Joined: Sat Nov 17, 2018 1:13 pm
Location: Krakow, Poland
Motorcycle: GL 1500 1990
Contact:

Re: Reverse not working

Post by PiotrGL1500 » Mon Dec 10, 2018 12:01 pm

Checked today and was no relay click or click of any kind. Where exactly is that relay located? But no clck anyway.

User avatar
Erdeniz Umman
Posts: 740
Joined: Tue Oct 27, 2015 12:33 am
Location: Ankara Turkey
Motorcycle: 2000 GL1500SE

Re: Reverse not working

Post by Erdeniz Umman » Mon Dec 10, 2018 1:15 pm

It is not the only relay in the system, there are some others too.
Here are two pictures of the start reverse diagram.
So, it will be better to follow the diagram for troubleshooting.
You can ignore the red dots, which are my notes showing the differences from earlier models.

Relay A (Starter relay Switch A), is near the battery, over the 55A fuse.
Note that relay B is not used during reverse function.
Attachments





PiotrGL1500
Posts: 10
Joined: Sat Nov 17, 2018 1:13 pm
Location: Krakow, Poland
Motorcycle: GL 1500 1990
Contact:

Re: Reverse not working

Post by PiotrGL1500 » Tue Dec 11, 2018 11:01 am

That looks a bit complicated. I'm striping down my Baby and must get rid of all parts that are not very much neccessary. Reverse system looks like few kilo of unwanted stuff. I was thinking about about leaving reverse but not in case of so many stuff.



Post Reply