Breather hose/Clutch cable Rad overflow layout


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
Post Reply
seismicpete
Posts: 2
Joined: Tue May 29, 2018 3:46 pm
Location: lincoln
Motorcycle: 1978 gl1000
1968 T100ss

Breather hose/Clutch cable Rad overflow layout

Post by seismicpete » Fri Dec 14, 2018 4:49 pm



1978 gl1000 Does anyone have a picture/diagram of the correct/manufacturers layout for clutch cable, rear brake light cable, radiator overflow pipe and breather hose as they pass between fuel tank and frame on their way up towards the airbox. I am currently correcting many faults from previous owners. I can`t seem to find a pic anywhere. cheers Pete



User avatar
rudolphwolven
Posts: 105
Joined: Fri Jun 20, 2014 7:05 am
Location: Netherlands - Utrecht
Motorcycle: 1975 GL1000 K1

Re: Breather hose/Clutch cable Rad overflow layout

Post by rudolphwolven » Fri Dec 14, 2018 7:54 pm

I hope this will help a little......
The 2nd link (German language) can be enlarged !!
Best regards from the Netherlands / Europe,
Ruud

https://postimg.cc/mtmPLp5x






https://postimg.cc/t7CyqRQT






Pictures during dismantling a 1975 GL1000 K1 before restoration...........





























Proud winner of the NGWClub-USA contest Bike of the Year 2016--Image

seismicpete
Posts: 2
Joined: Tue May 29, 2018 3:46 pm
Location: lincoln
Motorcycle: 1978 gl1000
1968 T100ss

Re: Breather hose/Clutch cable Rad overflow layout

Post by seismicpete » Sat Dec 15, 2018 5:42 pm

Thanks Ruud. I have seen all those diagrams before. It is the right side of the bike where my problem is, where the clutch cable comes up from the engine and meets the radiator overflow pipe, the breather hose and brake light cable. there is a limited amount of space between the fuel tank and frame. Surely Honda had the best order to fit these 4 items.

User avatar
rudolphwolven
Posts: 105
Joined: Fri Jun 20, 2014 7:05 am
Location: Netherlands - Utrecht
Motorcycle: 1975 GL1000 K1

Re: Breather hose/Clutch cable Rad overflow layout

Post by rudolphwolven » Sat Dec 15, 2018 7:43 pm











Proud winner of the NGWClub-USA contest Bike of the Year 2016--Image

User avatar
flyday58
Posts: 57
Joined: Tue Jan 08, 2019 1:10 am
Location: Cloudcroft NM
Motorcycle: 1976 GL1000
1976 GL1000 LTD
1981 CB750C
2006 VRSCR Street Rod
Couple of dirt bikes

Re: Breather hose/Clutch cable Rad overflow layout

Post by flyday58 » Mon Mar 11, 2019 4:33 pm

Bump. Anyone have a good pic or description concerning this? I think Honda invented the blivit, because this is definitely one. Cramming two hoses and a clutch cable between the frame and the tank so far ain't happening for me. It would be easier (but uglier) to route one of the hoses outside the frame. Thanks.


"Who left the fridge open?" Tug Speedman

Post Reply