Suzuki Burgman CV transmission video


Brothers and Sisters to our Goldwings - Other Bikes we Own
Post Reply
User avatar
WingAdmin
Site Admin
Posts: 20829
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer

Suzuki Burgman CV transmission video

Post by WingAdmin » Sun Apr 21, 2019 7:33 pm



I have my wife's Burgman 400 apart right now doing some maintenance (new CV sliders, belt, oil, etc.). I thought I would post a video that I took of the CV transmission in operation, just because it's pretty cool to see how it varies the ratio as the speed changes:



   Never miss a video: Subscribe to the GoldwingDocs YouTube channel today!


The front pulley is connected to the engine crankshaft. The rear pulley is connected to a centrifugal clutch. As the engine speed increases, the clutch engages, which connects the rear wheel to the rear pulley through a reduction gearbox drive.

As the engine speed increases, weights in the front pulley cause the pulley space to close up, forcing the belt outward. This pulls the spring-loaded rear pulley space to open up, forcing the belt inward. Effectively, this changes the ratio gradually, without any gear shifts.



User avatar
Stew
Posts: 370
Joined: Mon Oct 23, 2017 10:40 am
Location: Smokey Point, WA - USA
Motorcycle: 2000 GL1500 SE
2005 Honda CRF230F

Previous bikes:
2003 Honda Ruckus
1993 Honda Elite 50 SR
1986 Honda CR125R
1979 Yamaha GT80

Re: Suzuki Burgman CV transmission video

Post by Stew » Sat May 18, 2019 1:21 pm

Back when I had my Honda Ruckus I had the CV transmission cover off and was watching it work just like in your video, I knew how these types of transmissions worked but had never seen one in action. I was expecting the centrifugal clutch to be on the drive pulley end, not the driven pulley end, but quickly realized it wouldn't work like that because the belt has to be always moving in order to move up and down the pulley diameters, say like when you're coming to a stop and it's adjusting the ratios back to a low gear ratio.
Winging it every chance I get 8-)

19,119 miles when I got it from dad Oct 15, 2017 --- 26,975 miles and counting as of Aug 15, 2019!

User avatar
WingAdmin
Site Admin
Posts: 20829
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer

Re: Suzuki Burgman CV transmission video

Post by WingAdmin » Mon May 20, 2019 10:57 am

Stew wrote:
Sat May 18, 2019 1:21 pm
Back when I had my Honda Ruckus I had the CV transmission cover off and was watching it work just like in your video, I knew how these types of transmissions worked but had never seen one in action. I was expecting the centrifugal clutch to be on the drive pulley end, not the driven pulley end, but quickly realized it wouldn't work like that because the belt has to be always moving in order to move up and down the pulley diameters, say like when you're coming to a stop and it's adjusting the ratios back to a low gear ratio.
I was thinking the exact same thing about the clutch location. I ran it up both to check my work (I had just replaced the CV sliders and belt), as well as watch it function just for curiosity's sake. :)

User avatar
Pam
Posts: 367
Joined: Wed May 11, 2011 12:19 pm
Location: Canada
Motorcycle: 1982 Kawazaki KZ 1100 1983 Yamaha Venture Royal (sold and miss it) 2006 Goldwing GL1800 1992 Yamaha Virago

Re: Suzuki Burgman CV transmission video

Post by Pam » Wed Mar 25, 2020 9:03 pm

snowmobiles use the same system.

User avatar
WingAdmin
Site Admin
Posts: 20829
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer

Re: Suzuki Burgman CV transmission video

Post by WingAdmin » Wed Mar 25, 2020 11:10 pm

Pam wrote:
Wed Mar 25, 2020 9:03 pm
snowmobiles use the same system.
Yup, we used to carry a spare belt in our snowmobiles. Not great being stranded 20 miles in the bush with a broken belt!



Post Reply