Driveshaft fluid change


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
Post Reply
Joel Wayne
Posts: 9
Joined: Sat Mar 30, 2019 8:52 pm
Location: Eugene, Oregon usa
Motorcycle: 1977 GL1000

Driveshaft fluid change

Post by Joel Wayne » Tue Jun 04, 2019 7:36 pm



New to driveshaft stuff. I could use some leads or advice on changing and how often the driveshaft fluid.
Joel



User avatar
WingAdmin
Site Admin
Posts: 20246
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer

Re: Driveshaft fluid change

Post by WingAdmin » Tue Jun 04, 2019 8:03 pm

Joel Wayne wrote:
Tue Jun 04, 2019 7:36 pm
New to driveshaft stuff. I could use some leads or advice on changing and how often the driveshaft fluid.
Joel
The owner's manual for the GL1000 states to replace it every 25,000 miles.

I typically do mine every other year, which works out to around 10,000-12,000 miles.

User avatar
gipsy42
Posts: 115
Joined: Sat Jun 12, 2010 8:58 pm
Location: Villa Adelina, Bs.As. Argentina
Motorcycle: 1993 GL1500 SE
1978 GL1000
Contact:

Re: Driveshaft fluid change

Post by gipsy42 » Tue Jun 04, 2019 8:12 pm

Welcome to this nice forum Joel:
At your question, it's bettrer to drive for about 1/2 hour to get the oil wamr so it flow better when the drain plug is removed, let it drain and refill with recomended fluid.
Per Clymer manual, it's recomended to replace oil every 22.500 Mi./36.000 Km.
Find attached lub chart.
Good luck with your bike, it's a great machine.
Attachments


Mario
aka Gipsy42
And still riding...
I just regrets the things I haven't done.

http://www.surfcam.com.ar
http://www.cre-angeles.org.ar

Joel Wayne
Posts: 9
Joined: Sat Mar 30, 2019 8:52 pm
Location: Eugene, Oregon usa
Motorcycle: 1977 GL1000

Re: Driveshaft fluid change

Post by Joel Wayne » Tue Jun 04, 2019 8:13 pm

Just what I needed. Thank you.

User avatar
Joneszy
Posts: 68
Joined: Sat Jun 24, 2017 10:27 pm
Location: Manitoba Canada
Motorcycle: 1983 GL1100A Aspencade Stripped
1999 Valkerie CT
1978 Gl1000 project bike

Re: Driveshaft fluid change

Post by Joneszy » Tue Jun 04, 2019 9:42 pm

BTW it is wise to try open the fill port before draining. Some folks have had problems getting the refill cap off. So before draining make sure to loosen that plug. If you drain the diff before you do this you could be unable to get the troublesome refill cap off and be unable to ride your bike until you do.

dualsport
Posts: 4
Joined: Tue Mar 05, 2013 3:42 pm
Location: Sacramento
Motorcycle: 1987 GW Aspencade, 2006 KLR 650, ‘79 GL1000, 2016 VSTROM 650, 2015 Valkryie , 2006 Suzuki DR200

Re: Driveshaft fluid change

Post by dualsport » Sat Jun 08, 2019 11:58 am

That’s smart! The little tricks make a big difference.



Post Reply