Spacing b/w side mirror assembly and front panel...


Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
modou
Posts: 5
Joined: Sun May 19, 2019 10:44 pm
Location: Oakland, CA
Motorcycle: 1999 GL1500 SE

Spacing b/w side mirror assembly and front panel...

Post by modou » Wed Aug 14, 2019 6:41 pm



Recently I replaced my windscreen on my 99' GL1500 SE and after which there is a huge gap that exit now b/w the right side mirror assembly and the front panel. The gap was half the spacing before I replaced the windscreen, and now it has almost doubled in width. Any suggestions or solutions?



tsandvik
Posts: 70
Joined: Mon Dec 14, 2015 2:05 pm
Location: Tampa, FL
Motorcycle: 1990 GL1500 Aspencade

Re: Spacing b/w side mirror assembly and front panel...

Post by tsandvik » Thu Aug 15, 2019 7:11 am

A picture in this case would be most helpful. I just finished doing same thing during last 3 days so might be able to help out. Just not sure exactly what you are describing.

Post Reply