Exhaust cover question


Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Post Reply
User avatar
Charlie1Horse
Posts: 473
Joined: Mon Sep 16, 2013 9:35 pm
Location: Jacksonville, Florida
Motorcycle: 1986 GL1200A Aspencade
1992 GL1500I Interstate

Exhaust cover question

Post by Charlie1Horse » Mon Oct 07, 2019 8:06 pm



I recently found a recycler that has a used pair of front exhaust pipe covers (with control cables) from a 1990 SE and I would like to replace them on my 92 Interstate, but, don't know if they will fit. Partzilla numbers for the 92 Interstate are; (L) 18425-MW5-000ZD and (R) 18325-MW5-000ZD. The 1990 Aspencade numbers are; (L) 18425-MT8-010ZA(B) and (R) 18325-MT8-010A(B). If they will physically fit I would like to replace them as my covers are rusted out. The rubber plugged hole is there in the dash for the control so I'm hoping they will fit. My thought is that for the 3.5 days of cold weather we have here in NE Florida it would be nice to have the toe warmers. Anyone have any thoughts about this? I need to replace the originals anyway.
Thanks, Russell

Those who say it cannot be done should try not to interrupt those who are doing it.



User avatar
AZgl1800
Posts: 1841
Joined: Thu Oct 30, 2008 2:46 pm
Location: Lake Oologah Indian Territory USA
Motorcycle: '02 GL1800

Re: Exhaust cover question

Post by AZgl1800 » Mon Oct 07, 2019 9:59 pm

nearly everything from 1990 on is the same, at least the mechanicals

Honda changes the part numbers yearly just to keep us from finding what we need.
~John
What is the Forum Index?
http://bit.ly/2GnjbzV

Download it here:
http://bit.ly/2SLDNqF

Post Reply